ELITE G-Pro Community Dimple Pick-06 (R2)

The Multipick ELITE G-PRO Community Single Pick 10 R00 combines the proven finely polished R00 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The R00 pick is designed for:Right-oriented flag: the working surface of the tip is intended for situations where a right-sided approach inside the keyway is preferred or required.Flag width 1.30 mm: this very slim contact surface is especially useful in extremely narrow keyways where a tip is needed that can pass cleanly around contours without prematurely contacting or binding against surrounding surfaces.Flag length 1.50 mm: this short flag is helpful when space inside the keyway is limited and a highly controllable tip is desired that is less likely to unintentionally contact neighbouring pins or guide surfaces.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a direct, neutral approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 1.50 mmFlag width: 1.30 mmFlag offset: 0.00 mmFlag orientation: rightBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

Designed by Lock Noob Especially designed for Multipick by Lock Noob to suit the special characteristics of a dimple lock. Also supports cylinders from North American manufacturers. This dimple lock tensioner is made from Multipick's well-known high quality spring steel  which ensures a sensitive feedback. Multipick ELITE Dimple Lock Tensioner SP-62 - 1.3 x 2.5 mm Dimensions:Shank width: 2.5 mmThickness: 1.3 mm Multipick ELITE Dimple Lock Tensioner SP-63 - 1.3 x 3.0 mm Dimensions:Shank width: 3.0 mmThickness: 1.3 mm Multipick ELITE Dimple Lock Tensioner SP-64 - 1.3 x 4.0 mm Dimensions:Shank width: 4.0 mmThickness: 1.3 mm Multipick ELITE Dimple Lock Tensioner SP-65 - 1.5 x 2.5 mm Dimensions:Shank width: 2.5 mmThickness: 1.5 mm Multipick ELITE Dimple Lock Tensioner SP-66 - 1.5 x 3.0 mm  Dimensions:Shank width: 3.0 mmThickness: 1.5 mm Multipick ELITE Dimple Lock Tensioner SP-67 - 1.5 x 4.0 mm Dimensions:Shank width: 4.0 mmThickness: 1.5 mm A product of Multipick "Made in Germany - Made in Bonn". 

The Multipick ELITE G-PRO Community Single Pick 11 L00 combines the proven finely polished L00 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The L00 pick is designed for:Left-oriented flag: the working surface of the tip is intended for situations where a left-sided approach inside the keyway is preferred or required.Flag width 1.30 mm: this very slim contact surface is especially useful in extremely narrow keyways or profiles with pronounced contours, allowing the tip to pass through cleanly without prematurely contacting or binding against surrounding surfaces.Flag length 1.50 mm: this short flag remains highly controllable when space inside the keyway is limited and helps avoid unintentional contact with guide surfaces or neighbouring pins.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a direct, neutral approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 1.50 mmFlag width: 1.30 mmFlag offset: 0.00 mmFlag orientation: leftBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The Multipick ELITE G-PRO Community Single Pick 12 L3 combines the proven finely polished L3 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The L3 pick is designed for:Left-oriented flag: the working surface of the tip is intended for situations where a left-sided approach inside the keyway is preferred or required.Flag width 1.40 to 1.60 mm: this slim, slightly tapered contact surface is especially useful in narrow keyways where a tip is needed that can pass cleanly around contours, while the slightly wider section still provides enough contact area when greater stability on the dimple is desired.Flag length 1.60 mm: this short flag remains highly controllable when space inside the keyway is limited and helps reduce the risk of unintentionally contacting guide surfaces or neighbouring pins.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a direct, neutral approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 1.60 mmFlag width: 1.40 to 1.60 mmFlag offset: 0.00 mmFlag orientation: leftBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The Multipick ELITE G-PRO Community Single Pick 02 LW1 combines the proven finely polished LW1 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The LW1 pick is designed for:Left-oriented flag: the working surface of the tip is intended for situations where a left-sided approach inside the keyway is preferred or required.Flag width 1.80 mm: this narrower contact surface is particularly helpful in restrictive or narrow keyways, allowing cleaner access to the pins without catching on surrounding contours.Flag length 1.80 mm: compact and easy to control, making it especially useful when precise pin placement is required and a shorter flag reduces the risk of binding or unwanted movement inside the keyway.Flag offset 0.70 mm: the more pronounced offset can be advantageous when accessing pins that are not reachable by a straight approach, for example when keyway contours require a slightly angled entry.Specifications:Flag length: 1.80 mmFlag width: 1.80 mmFlag offset: 0.70 mmFlag orientation: leftBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g