ELITE G-PRO handle without flag pick blade

The ELITE G-Pro Replacement Dimple Pick-13 (LR1) “Flat Flag” was developed exclusively for Multipick in collaboration with the renowned lockpicker Lock Noob.The tool is based on a unidirectional flat flag profile – one of the most versatile designs for manipulating dimple locks.The key feature lies in its alignment: the flag is perfectly in line with the shaft, resulting in an especially slim profile – ideal for tight tolerances and complex dimple locks.This geometry allows pins to be manipulated from both sides without losing torque control. This is a decisive advantage, particularly with high-security dimple locks that have multiple pin rows – such as top/bottom or side-by-side arrangements.Thanks to its dual-sided usability, the Flat Flag is suitable for left or right-hand operation, reducing the constant need to switch between different picks.High versatility, precise control even in narrow keyways, and optimal handling in complex locking systems – these are the strengths of this pick.Specifications:Flag length: 2 mmFlag width: 2.5 mmFlag offset: 0.00 mmFlag offset: 0.00 mmFlag orientation: left, rightBlade shank diameter: 1.15 mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 1.50mmFlag width: 1.30mmFlag outreach: 0.00mmFlag orientation: rightShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 1.50mmFlag width: 1.30mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 1.60mmFlag outreach: 0.00mmFlag orientation: rightShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 1.60mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mm