ELITE Small tension tool SP-42

SP-41 to SP-44 are small tension tools for different small locks as for example on letter boxes and locks with very narrow lock holes. A MUST for the professional equipment! 

SP-41 to SP-44 are small tension tools for different small locks as for example on letter boxes and locks with very narrow lock holes. A MUST for the professional equipment! 

SP-41 to SP-44 are small tension tools for different small locks as for example on letter boxes and locks with very narrow lock holes. A MUST for the professional equipment! 

This tension tool was created, especially for tensioning in front of the pins, so that there will be more room to work within the keyway. This type of tensioning technique is the preferred option for almost all cylinder locks when it comes to pick opening. Various sizes and gauges ensure that the tool sits perfectly and there is also a choice to match a wide range of profiles. All tension tools in this Champion series are rigid in order to give optimum feedback when picking. Dimensions:Length: 77 mmWidth: 2.0 mmThickness: 0.8 mmSide length (inner): 7.2 mmSide length (outer): 8.0 mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 1.60mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mm