Genius PUR Tilt & Turn Window Opener

The (in our opinion) perfect Door Latch Slider The latch opening slider “TFG” completes our selection of tools for the opening of closed but unlocked doors . We are absolutely enthusiastic about the tool’s effectiveness and quality and use the "TFG" on an almost daily basis ourselves. The "TFG" comes in 5 different sizes: 15, 20, 25, 30 & 35 mm, each size optimized for the different types of offset door designs. Experience tells us that there is no better tool for the simple opening of closed but unlocked doors. Put this to the test yourself! The use is incredibly easy! Insert the "TFG" in the gap between door and frame, slide it down to the latch and the door opens.It is made out of highly flexible spring steel and is only as thick as 0.8 mm. The "TFG" can be used effectively almost everywhere. The "TFG" has no sharp edges, and does not cause scratches or other damages on the door or the frame. If the sliding of the "TFG" is made difficult by the sealing strip, lubrication of the "TFG" is very effective. 

Now you can also order the "Genius Repair Kit" through us, consisting of 2 sturdy nylon ribbon cables and 5 repair press clamps that can be used to repair your “Genius” with just a few taps from a hammer.  

Lifter for security-fittings usually allow lifting of the security fitting in order to insert a square bolt knife into the gap and turn the handle mechanism.Normally this opening technique is only possible with simple fittings which are not screwed together. The device of the “Bridge” lifter for fittings is fixed to the exterior door handle. On regular pulling by use of the screws the fitting comes off the door leaf by a few millimeters. The adapted square bolt knife will be inserted to the gap and the lock will be opened by turning the square bolt. NEW! Highly durable and long lasting construction. Big advantage due to new special trapezoidal thread which makes it easy to tighten - this prevents the thread from "seizing". The regular and smooth pulling of the fitting by the 2 screws of the Bridge should be careful since pressure marks of the tools’ feet may occur in case of inattention! The respective square bolt knives (8 mm and 10 mm) are included. Also this tool is very well adapted together with our emergency set for broken latch. A 17 mm driver is needed in order to turn the screws lifting the fitting! The “Bridge” differs essentially from the other lifters on the market in the following ways:Assembly of high-value aluminiumDespite new light weight construction extremely loadableVery solid finishingExtremely high durabilityOptimal exertion and distribution of pulling forceBig advantage due to new special trapezoidal threadQuick identification of bolt diameter through millimeter markings    

The Multipick KRONOS is a professional electric lock pick gun for non-destructive opening of profile cylinders — engineered for reliable use in locksmithing and related trades. Modern electronics and a powerful, low-vibration motor deliver quiet, precise operation with a finely adjustable striking amplitude for controlled performance in demanding situations.The set includes original Multipick ELITE pick needles in 0.5 mm plus an additional, extra-durable 0.6 mm needle set for greater tolerance to handling errors. A second battery keeps the unit ready for uninterrupted use. The Flip-It plug spinner provides effortless, accurate turning, while the TNT-20-V3 circular tensioner flexibly adapts to different cylinder profiles without extra tools. Everything is housed in a robust hard-shell case with a custom inlay and an additional compartment box for small parts.The Multipick KRONOS is ideal for efficient on-site work — even under time pressure — and is designed to be compact, precise, and ready to use.User benefits: Quiet operation, high precision, well-designed accessories – compact and ready to use.Technical Data of the KRONOS:Battery: Li-Ion 3.7 V / 2900 mAhNeedle stroke: adjustable 1–4 mm at the needle chuckNo-load speed (idle): 13,000 rpmWeight (with battery): approx. 350 gDimensions: Ø 34 mm × length 205 mmBattery runtime (continuous): approx. 2.5 hours 

THE NEW V-PRO SELF-TAPPING EXTRACTION-SCREWS Manufactured according to the latest state-of-the-art technical expertise Very powerful!High tensile strength and breaking load, combined with a high degree of torsion Our most economical customer uses our screws repeatedly up to 6 times - what should we do about this? No pre-drilling required! (self-tapping)It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coatingOptimized thread geometry and screw length!Maximum retention force in each cylinder profileOne-handed screw-in without a ScrewFix bit adapter!Whether by hand or cordless electric screwdriver, via its patented SIT® 20-bit drive (fully downward compatible with TORX20) A great advantage of the SIT 20 drive is that the screw can be driven in with one hand and without a screw adapter. Those who have ever had to thread in screws of other manufacturers will love this advantage! Having a high speed on the drill and applying pressure on the screw is advantageous for easy threading of the V-PRO extraction screw! DELTA SEAL® High-tech color anti-friction coating!The anti-friction coating supports easy screw-in actionAn individual colour scheme for each screw sizeCorrosion protection Important! Experience has shown that a lubricant is often used to assist in threading the screw. This is not necessary with V-PRO extraction screws and in fact is counterproductive.Our screw has an anti-friction coating that does not require a lubricant. If additional lubrication is used, it can lead to the shavings becoming clumped which can no longer be eliminated. V-PRO screws have an impression stamped into the screw-head! Latest technology — Made in Germany!We guarantee the highest qualityDepending on the ordered quantity, the screws will be sent either in boxes or sachets. In this packaging unit we include a SIT20 quality bit.