Skip to main content Skip to search Skip to main navigation
Quality products since 1997
International distribution
Shipping within 24 hours*
Personal point of contact
Purchase on Account for Authorities

Latch Opener 1.75 mm double-offset

Product information "Latch Opener 1.75 mm double-offset"

The new Latch Opener Set (2 pieces: 1x 1.5mm and 1x 1.75 mm, made of spring steel wire, with handle) is especially designed for the opening of double-offset doors. After pulling the door out of its frame for a little distance, using the Multi-Opener, Door Lever or Suction Cup etc., the appropriate latch opener is inserted into the gap and pulled up into the direction of the latch. Be careful not to rip out the sealing while doing so. When touching the latch with the tool’s tip, twist the tip of the tool against the latch and the door will open. 

Manufacturer "Multipick"

Multipick Direct GmbH
Godesberger Str. 51
53175 Bonn
Germany
Telephone: +49 228 39187 60
Telefax: +49 2283918741
E-Mail: [email protected]

    Contents:

     

  • 1 Latch Opener 1.75 mm double-offset

  •   
  • 0 of 0 reviews

    Average rating of 0 out of 5 stars

    Leave a review!

    Share your experiences with other customers.


    Customers who bought this item also bought

    In stock
    Interchangeable Extractor Set 5 pcs. - HPC
    Interchangeable Extractor Set 5 pcs. - HPC
    The 4 extractors are stored in the hollow handle and can be place in the tension holder when needed. This saves place while at the same time allowing an optimal handling. These extractors vary greatly from the Extractor Set 2000. The spiral-shaped are turned into the keyway below the broken-off key and in most cases allow an easy extraction of key-parts. 
    SKU#: 3105
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    previous price: $27.45 *
    $27.45 net
    excl. shipping costs
    Available ex stock
    In stock
    Latch Opening Card Set 9pcs. 3x0.25/3x0.35/3x0.50 mm
    Latch Opening Card Set 9pcs. 3x0.25/3x0.35/3x0.50 mm
    The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 
    SKU#: 33912
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    $9.60 net
    excl. shipping costs
    Available ex stock
    In stock
    Handle (white) for Opening-Cards
    Handle (white) for Opening-Cards
    The handle makes working much more comfortable and protects against injuries inside the hand by the edges of the opening cards.  Assembling is easy: with a simple paper punch the card can be punched and fitted like a sandwich between the two handle parts the two crosshead screws and their counter nuts. 
    SKU#: 33916-1
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    previous price: $7.84 *
    $7.84 net
    excl. shipping costs
    Available ex stock
    In stock
    GREEN-TEC 6x50x18 mm Ball nosed (HP-3 PRO)
    GREEN-TEC 6x50x18 mm Ball nosed (HP-3 PRO)
    The revolutionary new Universal-PRO cutting style  Up to 82% more material removal than our usual HP-3 universal cutting style. *Long tool life comes with high performance.Almost vibration-free and controlled work even under tough roughing conditions possible.Available in the latest GREEN-TEC coating technology for another significant increase in tool life. For all types of steel such as:- Cast iron- Steel <60 HRC- Stainless steel (INOX)- Nickel basis and titanium alloy- Also for copper, brass, bronzeSpecifications:Ø Shank: 6 mmTotal length: 50 mmCutting length: 18 mm * If the aggressive material removal / roughing of the new Universal-PRO cut appears too strong for you, please use our proven HP-3 universal cut. 
    SKU#: 116092-010
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    $21.43 net
    excl. shipping costs
    Available ex stock
    In stock
    GREEN-TEC 8/6x65/20-(HP-3 PRO)
    GREEN-TEC 8/6x65/20-(HP-3 PRO)
    The revolutionary new Universal-PRO cutting style Up to 82% more material removal than our usual HP-3 universal cutting style. *Long tool life comes with high performance.Almost vibration-free and controlled work even under tough roughing conditions possible.Available in the latest GREEN-TEC coating technology for another significant increase in tool life. For all types of steel such as:- Cast iron- Steel <60 HRC- Stainless steel (INOX)- Nickel basis and titanium alloy- Also for copper, brass, bronzeSpecifications:Ø Milling head: 8 mmØ Shank: 6 mmTotal length: 50 mmCutting length: 20 mm * If the aggressive material removal / roughing of the new Universal-PRO cut appears too strong for you, please use our proven HP-3 universal cut. 
    SKU#: 116092-020
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    previous price: $23.78 *
    $23.78 net
    excl. shipping costs
    Available ex stock
    In stock
    Complete Mobile Door Latch Wire Needle Set
    Complete Mobile Door Latch Wire Needle Set
    A single set for many door-opening possibilities. This 9-piece set offers you the answer to the most common door-opening issues. Due to the varied bendings of the 1.7 mm wires, there will certainly be a suitable wire for your task. A set that should be part of every locksmith's tool kit.Scope of Delivery:• 1x Standard double rebate wire needle• 1x Double rebate wire needle for rebate windows• 1x Standard single rebate wire needle• 1x Single rebate wire needle for fire resistant doors• 1x Single rebate wire needle for aluminium doors• 1x Single rebate wire needle for uPVC doors• 1x Single rebate wire needle for uPVC/metal doors• 1x Single rebate wire needle for panic doors (outward opening)• 1x Spring wire for cylinder clutch and for dismantling BKS round cylinders 
    SKU#: 33836
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    $26.92 net
    excl. shipping costs
    Available ex stock

    Customers also viewed

    In stock
    Latch Opener 1.5 mm double-offset
    Latch Opener 1.5 mm double-offset
    The new Latch Opener Set (2 pieces: 1x 1.5mm and 1x 1.75 mm, made of spring steel wire, with handle) is especially designed for the opening of double-offset doors. After pulling the door out of its frame for a little distance, using the Multi-Opener, Door Lever or Suction Cup etc., the appropriate latch opener is inserted into the gap and pulled up into the direction of the latch. Be careful not to rip out the sealing while doing so. When touching the latch with the tool’s tip, twist the tip of the tool against the latch and the door will open. 
    SKU#: 33820
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    previous price: $21.04 *
    $21.04 net
    excl. shipping costs
    Available ex stock
    In stock
    TSA master key set - 7 pieces
    TSA master key set - 7 pieces
    Multipick TSA Master Key Set for Luggage LocksA set of keys for non destructive opening and closing TSA Transportation Security Administration approved locks. There are seven types of TSA locks currently in circulation that can be opened and closed without having to destroy it with the aid of this set of keys. Some TSA locks are permanently mounted on suitcases, and some come as traditional padlocks. These keys, for example can come in handy, to open a TSA lock non-destructively and use it after having bought at a baggage auction.Our TSA keys are made out of a high-quality special alloy and are highly durable. All keys have been thoroughly tested by us and are 100% accurate. Each key is also available separately.TSA 06 is not compatible with Rimowa brand TSA locks. 
    SKU#: TSA-SET
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    $281.73 net
    excl. shipping costs
    Available ex stock
    In stock
    Complete Mobile Door Latch Wire Needle Set
    Complete Mobile Door Latch Wire Needle Set
    A single set for many door-opening possibilities. This 9-piece set offers you the answer to the most common door-opening issues. Due to the varied bendings of the 1.7 mm wires, there will certainly be a suitable wire for your task. A set that should be part of every locksmith's tool kit.Scope of Delivery:• 1x Standard double rebate wire needle• 1x Double rebate wire needle for rebate windows• 1x Standard single rebate wire needle• 1x Single rebate wire needle for fire resistant doors• 1x Single rebate wire needle for aluminium doors• 1x Single rebate wire needle for uPVC doors• 1x Single rebate wire needle for uPVC/metal doors• 1x Single rebate wire needle for panic doors (outward opening)• 1x Spring wire for cylinder clutch and for dismantling BKS round cylinders 
    SKU#: 33836
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    $26.92 net
    excl. shipping costs
    Available ex stock
    Only 1 available
    Artemis Electric Pick Complete Set - Master Black
    Artemis Electric Pick Complete Set - Master Black
    Artemis - the smallest handmade electric lock pick in the world.Now let's talk about true greatness! Small, handy and yet highly powerful. The new electric lock pick gun Artemis from Multipick. Small in its dimensions, but big in its success in opening. An electric pick that we produce exclusively in different colours and in limited quantities. We have managed to construct an electric lock pick that puts all known dimensions in the shade. The goal was to design a completely new electric pick gun with a clear focus on size and performance. For the entire concept, we not only reduced the size of the individual components, but also used a completely new high-performance motor for the first time, never used before in an electric pick. All parts were newly developed and adapted to the needs of the latest opening techniques. Due to its special structure, the high-performance motor has a very low inherent vibration, which results in a very smooth and, above all, quiet operation. The Multipick Artemis combines power, durability, control and exclusivity in a compact design. We have given the Multipick Artemis a special, skin-friendly soft-touch coating (not in the colour white). This not only gives the tool an elegant look, but also helps you to open the cylinder with precision and control. With the Multipick Artemis we have achieved something that many thought would not be possible for a long time. We are the only manufacturer of lockpicking tools to offer a professional electric pick which is handy in size and at the same time in no way inferior to a conventional tool. An electric pick that easily lasts for well over 2 hours and, like its big brother, the Kronos, almost guarantees opening success. All this shows true greatness and is the only thing that matters. Like all our tools, the Multipick Artemis is an exclusive piece of German engineering. Developed and produced here in Bonn. Of course, you can also use all our electric pick needles from our range with our Multipick Artemis. Colour:Master Black Features that speak for the Multipick Artemis: Very compact structure 25 x 181 mmSpace saving sizePowerful motorFinely adjustable amplitude deflectionSurface coat finish for safe workingUp to three hours operating timeDesigned for continuous useQuick battery change systemTwo-year warrantyMade in Germany Specifications: 2 x Li-Ion battery 3.7 V / 1400 mAhNeedle deflection precisely adjustable from 1 to 4 mm at the needle chuckIdle speed approx. 9.500 rpmWeight with battery approx. 190 gr.Dimensions: D=25 mm L=181 mmBattery life in continuous operation approx. 2 - 3 hrs. 
    SKU#: 12652
    only 1 available 

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    $421.72 net
    excl. shipping costs
    only 1 available
    Only 2 available
    Lishi HU87 -V2-AG Original Tool
    Lishi HU87 -V2-AG Original Tool
    This tool was developed for opening and decoding vehicle locks in a one-step operation.Developed for vehicle locks mentioned below, this tool features a special profile that enables targeted picking of each individual disc of the cylinder. Once successfully opened, the code can be read from the scale on the tool and a key can be produced. One tool, three functions: Tensioning, picking and decoding.Suitable for:NISSANPixo 2009 and laterSUBARUG3X Justy as of 2004SUZUKIAlto 2008 and later, Grand Vitara 2008 and later, Ignis 2000-2008, Jimny 2002 and later, Splash Diesel 2008 and later, Swift 2005 and later, SX4 2006 and later & Wagon R 2000-2008 and later.VAUXHALL / OPELAgila as of 2000 
    SKU#: 44352
    only 2 available 

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    $39.81 net
    excl. shipping costs
    only 2 available
    In stock
    ELITE Dimple Lock Tensioner SP-63 - 1.3 x 3 mm
    ELITE Dimple Lock Tensioner SP-63 - 1.3 x 3 mm
    Especially designed for Multipick by Lock Noob to suit the special characteristics of a dimple lock. Also supports cylinders from North American manufacturers.This dimple lock tensioner is made from Multipick's well-known high quality spring steel  which ensures a sensitive feedback. Dimensions:Shank width: 3.0 mmThickness: 1.3 mm A product of Multipick "Made in Germany - Made in Bonn". 
    SKU#: MP3SP63
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    previous price: $6.96 *
    $6.96 net
    excl. shipping costs
    Available ex stock
    In stock
    Pick Needle PN-1 Pro (0.5 mm)
    Pick Needle PN-1 Pro (0.5 mm)
    This pick needle, which we have optimised for electric lock picks as well as for other numerous pick guns, is equally suitable for beginners as well as for professional lockpickers. Unlike our other professional pick needles, here the shank is longer and curved leading to a higher needle tip for greater stability.  Nevertheless, they are supple in behaviour due to their thickness of 0.5 mm. 
    SKU#: 11500P
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    previous price: $2.43 *
    $2.43 net
    excl. shipping costs
    Available ex stock