Mini Milling Burr 3 x 80 / 12 mm - Ball nosed cylinder

The latest generation of solid carbide burrsThe cylindrical shape profile cylinder milling burr 6 x 80 mm from PFERD for locksmiths features a drilling tip and toothed cutting edges. This milling burr has been specifically designed for efficient and fast milling of security profile cylinders with pull protection. The built-in drill tip ensures precise alignment, which means that the profile cylinder can be milled precisely. Due to the toothing and the specially positioned grooves, optimum removal of shavings is achieved, which reduces the risk of jamming and breakage of the tool. This innovative burr also stands out due to its long lifespan. In comparison to other burrs, it enables profile cylinders to be opened much more quickly due to its high milling capacity. 

This solid carbide high-speed drill of the latest generation is made of 100% carbide. It is the top product for cylinder openings in record time, and distinguishes itself in a high durability. For best results use a milling machine. Even with a drilling machine or a cordless screwdriver this cutting burr gives conspicuous service. In connexion with our high performance grinding bits the user obtains an almost perfect and durable tool combination! With this drill the cylinder will be cut straight in very short time, no matter what kind of drilling protection you may find. Normally the cylinder should be possible to open by now. If it does not, you enlarge the existing whole sidewards with a grinding bit. Since this way of proceeding spares the tooth system of the grinding bit and besides is fast and efficient, we consider this combination of drill grinding bit and grinding bit as an ideal supplement.On top of our high performance cutting burrs a "must" for the equipment of every locksmith!Technical Data:Shaft-Ø: 6 mmLength: 60 mmCutting Length: 30 mm100% CarbideVery Long Durability 

Practical tool set for broken latches. Allows easy access of the broken latch. How to use:remove the escutcheonfix the latch, for ex. with the latch opening carduse the inner opening of the nut to center the jig saw to remove the nut.through the created opening the latch can be drawn back with the high-grade steel hook, even if the latch is blocked. 

This solid carbide milling burr 4 x 6 x 60 mm is cut off one piece. It distinguishes itself through rough drilling features, due to its deep cuts, which also leads to a good chipping removal.Special features:Due to the reduction of a 6 mm drill burr to 4 mm at the tip, working time is reduced by more than half, for less material has to be cut. A pleasant side effect: the core drawing protection doesn’t have to be destroyed thanks to the small milling burr head diameter. Technical features:Material: Solid carbide Form: cylindrical d1: 4.0 mm I1: 14.0 mm d2: 6.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

Ideal accessory for the installation of new fittings, locks and cylinders. Essential tool for the exact adjustment of fitting, lock and cylinder for new installations. Length approx. 200 mm.