Safe-End Burr 3x60 mm, flat bottomed

The Magi Burr 50 mm from Soubertools is a milling burr specially designed for opening locks. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

6-sided Cutter for drilling out tubular (radial pin tumbler) locks.  

The Plain Burr 50 mm from Soubertools is a milling burr specially designed for opening locks made of brass, steel and aluminium. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

Mini Milling Burrs enable the milling through the base protection of cylinder locks. This makes them perfectly adapted for locksmiths services.Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 15.0 mm d2: 3.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal useApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The Magi Burr 60 mm from Soubertools is a milling burr specially designed for opening locks. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.