Scale SO-2.0 for Disc Detainer Locks - Opener

These scales are used for unlocking disc tumbler-/disc detainer locks. They are available in different graduations. Also here, the selection of a scale depends on the type of lock you want to open. This scale corresponds to the graduation 1.6mm . 

Disc detainer locks are mainly padlocks and bicycle locks. The area of deployment is broad and can be found all over the world. With the ARES from Multipick and a little practice, you will be able to open almost any disc detainer lock. Furthermore, we offer common scales for Abus and Abloy. The difference is mainly in the graduation of 2mm (Abus, Abloy) and 1.6mm (Abloy). The scales are guides to make it easier to find the positions of the individual discs. The graduations already mentioned are the most widely used on the market. Of course, you can also use the scales for any other disc detainer lock. However, the graduation can then only be used as a reference. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer locks. With this set you will be able to open even tough locks. The basic module offers you the possibility to modularly expand your system.  Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, as used in all our products. In order to achieve smooth running between the tensioning tool and the setting tool, a sliding sleeve has been integrated. A clear laser marking of the corresponding components ensures precise orientation during operation. More control can be achieved by individually screwing the handles included in the scope of delivery into the basic module. These are necessary in some cases, especially when using the drill recess version. Changing the individual components, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money. The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly. Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products. In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

The so called tensioner is one of two components that is used with disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. 

This starter kit is an invaluable asset for people who are just entering the locksmith industry, and who need to gather experience with locking cylinders. It's equipped with all the necessary tools, supporting you from your very first attempts to pin cylinders. The set comes in a durable plastic case made from durable polyethylene. 

Basically, one or two positioning rings are included in a set. Depending on the type of set purchased, it will contain a positioning ring for dimple locks and/or a positioning ring for disc tumbler-/detainer locks. The rings give you a reference point in which area you are with the corresponding opening tool (pick or disc setter) and by means of the attached scales, you have a good orientation. This is a positioning ring for disc tumbler-/detainer locks. 

The so called disc setter with tensioner is used for disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10.  The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. More models are being planned.