SDB-Pick-006-3.5 for Dimple Locks - Opener

Here we are looking at different "Dimple pin picks" required for setting the pins in the lock. We currently offer 5 different picks. These differ in the design and shape of the "flags". Depending on the requirements, the corresponding pick is used.  

The new generation of spring loaded round tension ringsA development with high utility value To Pick or manipulate a cylinder, the cylinder core needs to be under gentle tension to be turned. On one hand while working with an electric pick, one mainly favours the possibility of a quick change of the tension direction. On the other hand manual pickers prefer a continuous turning tension in one direction. The new and high precisely produced semi- automatic tension ring TNT-20-V3 simplifies the whole work. The tension to the left and right side can be applicate fine and gentle, thanks to its extravagant production, and enables effortless use, thanks to its handle geometry The TNT-20-V3 is the only tensioner worldwide with the possibility to adapt to various different cylinders due to the quick and tool-less but exact change of the lower tension pin. Exchange pins for straight, left-sided and right-sided curved cylinder profiles are included in delivery.  The TNT-20-V3 is absolutely recommendable for both beginner and professionals, for manual picking and picking with electric picks. Outstanding abilities and improvements compared to the preceding models:Highly precise  fine-mechanic production from Germany (not to be compared with products from Asia or USA)New handle geometry enables sensitive and effortless tension to both sides.Tool-less changing of the tension pins for straight, left-sided and right-sided curved cylinder profiles for optimal and quick adjustment to all types of cylinders. Multipick TNT-20-V3 Intelligent and precise fine-mechanic "Made in Germany" by ©Multipick 

These scales are used when it comes to opening dimple locks. They are available in different graduations. The selection of a scale depends on the type of lock you want to open. We currently offer 4 different graduations: 3.1mm / 3.4mm / 3.6mm and 3.8mm. This scale corresponds to the graduation 3.6mm . 

 

Lifter for security-fittings usually allow lifting of the security fitting in order to insert a square bolt knife into the gap and turn the handle mechanism. The 50° angled blade ensures safe work without risk of injury to the users knuckles, since the operating hand do not rest directly on the door panel.Normally this opening technique is only possible with simple fittings which are not screwed together.