SDB-Pick-008-3.3 for Dimple Locks - Opener

The different key profiles serve primarily to guide the pick, as well as to establish the pre-tension when setting the pins.  Another advantage of our profiles is that they can be removed from the lock after picking and a possible second closure can be bypassed, for example using the flip-it. Furthermore, the key profile can be used to check the function of the pins by inserting the profile on the corresponding side of the pins. Information on this can also be found in the explanatory video. We currently offer 8 different key profiles for the corresponding cylinders. Further types are being planned. This key profile is for ABUS-XD25. 

The popular panic door opener is now available for doors opening to the left and to the right. The easiest direction for opening is to go from the top towards the bottom of the door. Now this is possible with both right and left hand doors. No more complicated handling thanks to the two different directions in which you can now select from, left or right, depending on the direction the door is opening to. Practical and effective!For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities! Extending the door gap can accomplished e.g. with a strong siphon, door wedges or a door lever.The tool is made from 1 mm spring steel.  33800 = Door use from the top right33805 = Door use from the top left 

ABUS D6X / EC750 / EC850 / D10 – ARES opening tool for dimple cylinder locks – With the Multipick ARES opening system, we have achieved a revolution in the field of tools for opening dimple cylinders. A tool that offers countless possibilities, reliably opening almost any dimple cylinder quickly with a bit of practice.The included scale in the scope of delivery is designed for the ABUS D6X cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick. In addition to the ABUS D6X, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Further links:All components and accessories / Overview of the ARES systemOperating instructions for the ARES system 

Our diverse key profiles serve primarily to guide the pick, as well as to establish the pre-tension when setting the pins. Another advantage of our profiles is that they can be removed from the lock after picking and a possible second closure can be bypassed, for example using the Flip-It. Furthermore, the key profile can be used to check the function of the pins by inserting the profile on the corresponding side of the pins. This allows you to check whether the pins are moving in order for it to be positioned. Information on this can also be found in our ARES explanatory video.Thanks to the modular design of the Multipick ARES opening system, we can offer various key profiles for the corresponding cylinder locks.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

The Multipick ELITE G-PRO Community Single Pick 13 LR1 combines the proven finely polished LR1 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle and flag version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The LR1 pick is designed for:Flat flag geometry: the flag is aligned flush with the handle, creating an especially slim profile that is ideal for tight tolerances and complex keyways.Flag width 2.50 mm: this wide, flat contact surface is useful when a stable point of contact is desired for controlled pin guidance and clean pin placement.Flag length 2.00 mm: this length provides controlled reach without the tip becoming unstable inside the keyway, making it particularly suitable when precise positioning is required in confined spaces.Left and right orientation: the double-sided usability allows pins to be approached from both directions without constantly changing picks, which is especially practical for locks with multiple pin rows or varying picking angles.Specifications:Flag length: 2.00 mmFlag width: 2.50 mmFlag offset: 0.00 mmFlag orientation: left, rightBlade Ø: 1.15 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g