Solid carbide milling burr for locksmiths 6 x 80 mm

This solid carbide high-speed drill of the latest generation is made of 100% carbide. It is the top product for cylinder openings in record time, and distinguishes itself in a high durability. For best results use a milling machine. Even with a drilling machine or a cordless screwdriver this cutting burr gives conspicuous service. In connexion with our high performance grinding bits the user obtains an almost perfect and durable tool combination! With this drill the cylinder will be cut straight in very short time, no matter what kind of drilling protection you may find. Normally the cylinder should be possible to open by now. If it does not, you enlarge the existing whole sidewards with a grinding bit. Since this way of proceeding spares the tooth system of the grinding bit and besides is fast and efficient, we consider this combination of drill grinding bit and grinding bit as an ideal supplement.On top of our high performance cutting burrs a "must" for the equipment of every locksmith!Technical Data:Shaft-Ø: 6 mmLength: 60 mmCutting Length: 30 mm100% CarbideVery Long Durability 

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!! 

The latest generation of solid carbide burrsThe cylindrical shape profile cylinder milling burr 4 x 70 mm from PFERD for locksmiths features a drilling tip and toothed cutting edges. This milling burr has been specifically designed for efficient and fast milling of security profile cylinders with pull protection. The built-in drill tip ensures precise alignment, which means that the profile cylinder can be milled precisely. Due to the toothing and the specially positioned grooves, optimum removal of shavings is achieved, which reduces the risk of jamming and breakage of the tool. This innovative burr also stands out due to its long lifespan. In comparison to other burrs, it enables profile cylinders to be opened much more quickly due to its high milling capacity. 

The approx. 1.5 m long, flexible vehicle opening tool is designed in such a way that its hooked end mimics finger movements when pulling levers and flipping rockers. The other end of the tool is formed into a handle.The bright colored tips facilitate working inside dark interiors. The robust body makes this a very durable tool in comparison to many other similar car openers. 

This solid carbide milling burr 4 x 6 x 60 mm is cut off one piece. It distinguishes itself through rough drilling features, due to its deep cuts, which also leads to a good chipping removal.Special features:Due to the reduction of a 6 mm drill burr to 4 mm at the tip, working time is reduced by more than half, for less material has to be cut. A pleasant side effect: the core drawing protection doesn’t have to be destroyed thanks to the small milling burr head diameter. Technical features:Material: Solid carbide Form: cylindrical d1: 4.0 mm I1: 14.0 mm d2: 6.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan