Suction Cup 105mm 40 Kg lifting capacity

The popular panic door opener is now available as a set for door opening right and left. No difficult operation anymore thanks to the coverage of all opening directions. Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities! Extending the door gap can accomplished e.g. with a strong siphon, door wedges or a door lever.Special:Spring steel blade, only 1mm thick. Also available individually33800 = Door use from the top right33805 = Door use from the top left  

Both window and door locks can be opened and re-locked as needed using this universal construction key or builder's key. The built-in measurement scale ensures precise and error-free determination of the required length for new cylinder installations. 

The Multipick magnetic lifter is characterised by its versatility. Thanks to its telescopic design, the magnetic staff can be extended from a compact length of 11.5 cm up to 50 cm for flexibility.It is made of high-quality chrome-plated metal and is fitted with a strong magnet at its tip to draw ferromagnetic metal pieces out of a cylinder or a broken or milled cylinder, as well as to remove small pieces of metal residue from the cylinder receptacle after use with our V-Pro extraction screws.The corrosion-resistant and durable material ensures a long service life. A practical feature is the integrated pocket clip, which makes the magnetic lifter to be transported easily. This means it can be comfortably taken along with you for any job, especially at the customer's premises. 

Lifter for security-fittings usually allow lifting of the security fitting in order to insert a square bolt knife into the gap and turn the handle mechanism.Normally this opening technique is only possible with simple fittings which are not screwed together. The device of the “Bridge” lifter for fittings is fixed to the exterior door handle. On regular pulling by use of the screws the fitting comes off the door leaf by a few millimeters. The adapted square bolt knife will be inserted to the gap and the lock will be opened by turning the square bolt. NEW! Highly durable and long lasting construction. Big advantage due to new special trapezoidal thread which makes it easy to tighten - this prevents the thread from "seizing". The regular and smooth pulling of the fitting by the 2 screws of the Bridge should be careful since pressure marks of the tools’ feet may occur in case of inattention! The respective square bolt knives (8 mm and 10 mm) are included. Also this tool is very well adapted together with our emergency set for broken latch. A 17 mm driver is needed in order to turn the screws lifting the fitting! The “Bridge” differs essentially from the other lifters on the market in the following ways:Assembly of high-value aluminiumDespite new light weight construction extremely loadableVery solid finishingExtremely high durabilityOptimal exertion and distribution of pulling forceBig advantage due to new special trapezoidal threadQuick identification of bolt diameter through millimeter markings    

The approx. 1.5 m long, flexible vehicle opening tool is designed in such a way that its hooked end mimics finger movements when pulling levers and flipping rockers. The other end of the tool is formed into a handle.The bright colored tips facilitate working inside dark interiors. The robust body makes this a very durable tool in comparison to many other similar car openers.