Tubular Lock Cutter

The cutter is attached to a power drill, or a heavy duty cordless screwdriver. It enables the penetration of the hardened steel front plate of the Abloy high security cylinder, and removal of the plug behind.  Product Features:4 crosswise carbide tipped cutting tools (Ø 15.2 mm)spring loaded drill bit guide (6.8mm) for centring the plugoptimised depth stoptriangular shaft to fit 3 jawed chuckMade in Germany     

The revolutionary new Universal-PRO cutting style  Up to 82% more material removal than our usual HP-3 universal cutting style. *Long tool life comes with high performance.Almost vibration-free and controlled work even under tough roughing conditions possible.Available in the latest GREEN-TEC coating technology for another significant increase in tool life. For all types of steel such as:- Cast iron- Steel <60 HRC- Stainless steel (INOX)- Nickel basis and titanium alloy- Also for copper, brass, bronzeSpecifications:Ø Shank: 6 mmTotal length: 50 mmCutting length: 18 mm * If the aggressive material removal / roughing of the new Universal-PRO cut appears too strong for you, please use our proven HP-3 universal cut. 

With the aid of this special tensioner, which was designed by Lock Noob especially for Multipick, a wide range of tubular locks can be opened successfully. In addition, this tensioner also supports the ball bearing drill protection found in some locks. This tubular tensioner is made from Multipick's well-known high quality spring steel  which ensures a sensitive feedback. A product of Multipick "Made in Germany - Made in Bonn". 

The Safe-End Burr 60 mm from Soubertools is a milling burr specially designed for opening locks made of steel. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

The Magi Burr 50 mm from Soubertools is a milling burr specially designed for opening locks. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.