Double-Offset Doors

The LockOff  Door Peephole Opener Kit - Now Being Manufactured By MultipickFrom now on, the LockOff door peep hole opener kit will be manufactured by Multipick in superior Multipick quality. However, we have kept the ingenious basic construction of the tool and simply reinforced the established weaknesses substantially. The Multipick LockOff has finally transitioned into a mature and durable tool, made in Germany.Thanks to its sophisticated system, this high-quality lever tool allows the opening of locked doors, whether single or double-rebated. It is particularly effective for opening self-locking doors.The included auxiliary tools, such as the “Special Pliers” and the “Peephole  Turbo-Helper”, which come in a high-quality shoulder bag for convenient transport and storage, are sufficient to open a door in the “blink of an eye” without causing any damage.In our opinion, this opening tool should be a “must have” component of in the professional equipment carried by emergency key services.Operation: Before using this tool, you should find out which type of door handle is installed. Unfortunately, rotary door knobs are also not operable with this opening tool. First, the length of the LockOff  lever arm must be adjusted. To do this, it's necessary to re-adjust and fix the LockOff rod, adjusting it from the center of the peephole to a position in relation to its distance to the door handle. The angled lever arm rests on the inside door handle. The rubber stopper on its tip prevents damage in case it hits the door. The door handle can be operated by pressing on the outside arm. The calibration of the lever arm in front of the door is very important! If it's too short, the lever slips off the handle before it can be pressed down sufficiently. If it's too long, one cannot generate enough force to press the lever down. In case of misalignment, the inserted LockOff can easily be pulled out and re-adjusted. The door peephole can also be easily removed from the outside with the special cranked pliers; take care to prevent scratches when the pliers slide off onto the door panel. With the LockOff – Peephole Turbo-Helper developed by us, you can remove all standard door peepholes without causing any destructive damage, in no time at all. Simply clamp it into a drill or screwdriver and “unscrew” the peephole with the necessary counter-pressure.Also, from now on, we will be offering a cost-effective modification, or repair  of your old LockOff. at a fixed price. All components with proven vulnerabilities will be replaced by new Multipick components, giving you a more robust and durable tool, including free express return shipping.Images may differ from original. 

The New Door Peephole Opener Lockoff - Now Being Manufactured By MultipickFrom now on, the door peephole opener LockOff will be manufactured by Multipick in superior Multipick quality. However, we have kept the ingenious basic construction of the tool and simply reinforced the established weaknesses substantially. The Multipick LockOff has finally transitioned into a mature and durable tool, made in Germany.Thanks to its sophisticated system, this high-quality lever tool allows the opening of locked doors, whether single or double-rebated. It is particularly effective for opening self-locking doors. In our opinion, this opening tool should be a “must have” component of in the professional equipment carried by emergency key services.Operation: Before using this tool, you should find out which type of door handle is installed. Unfortunately, rotary door knobs are also not operable with this opening tool. First, the length of the LockOff  lever arm must be adjusted. To do this, it's necessary to re-adjust and fix the LockOff rod, adjusting it from the center of the peephole to a position in relation to its distance to the door handle. The angled lever arm rests on the inside door handle. The rubber stopper on its tip prevents damage in case it hits the door. The door handle can be operated by pressing on the outside arm. The calibration of the lever arm in front of the door is very important! If it's too short, the lever slips off the handle before it can be pressed down sufficiently. If it's too long, one cannot generate enough force to press the lever down. In case of misalignment, the inserted LockOff can easily be pulled out and re-adjusted. The door peephole can also be easily removed from the outside with the special cranked pliers; take care to prevent scratches when the pliers slide off onto the door panel. With the LockOff - Peephole Turbo-Helper developed by us, you can remove all standard door peepholes without causing any destructive damage, in no time at all. Simply clamp it into a drill or screwdriver and “unscrew” the peephole with the necessary counter-pressure.Going forward, we will be offering a cost-effective modification, or repair  of your old LockOff. at a fixed price. All components with proven vulnerabilities will be replaced by new Multipick components, giving you a more robust and durable tool, including free express return shipping.Images may differ from original. 

Lifter for security-fittings usually allow lifting of the security fitting in order to insert a square bolt knife into the gap and turn the handle mechanism.Normally this opening technique is only possible with simple fittings which are not screwed together. The device of the “Bridge” lifter for fittings is fixed to the exterior door handle. On regular pulling by use of the screws the fitting comes off the door leaf by a few millimeters. The adapted square bolt knife will be inserted to the gap and the lock will be opened by turning the square bolt. NEW! Highly durable and long lasting construction. Big advantage due to new special trapezoidal thread which makes it easy to tighten - this prevents the thread from "seizing". The regular and smooth pulling of the fitting by the 2 screws of the Bridge should be careful since pressure marks of the tools’ feet may occur in case of inattention! The respective square bolt knives (8 mm and 10 mm) are included. Also this tool is very well adapted together with our emergency set for broken latch. A 17 mm driver is needed in order to turn the screws lifting the fitting! The “Bridge” differs essentially from the other lifters on the market in the following ways:Assembly of high-value aluminiumDespite new light weight construction extremely loadableVery solid finishingExtremely high durabilityOptimal exertion and distribution of pulling forceBig advantage due to new special trapezoidal threadQuick identification of bolt diameter through millimeter markings    

ATTENTION: The conversion does not apply to the long shank with tilt arm (see illustration!).From now on, we offer a cost-effective conversion or repair of your old LockOff. However, we need your old LockOff door peephole opener in order to do this.All parts that have proved to be weak points in the past will be replaced by Multipick components at a fixed price, giving you a more robust and durable tool including free return shipping.This is how it works:- Order and pay for the item here in our webshop- Send us your old tool- Allow us approx. 1 week- We will send back your "almost" new piece of equipment (shipping is included for DE).The repair/conversion process can only be carried out in our workshop. 

Latch Opening Cards for Double-Offset Doors Patented Opening Cards for Single and Double-Offset Doors. Having to open closed but unlocked double-offset doors locksmith may face various problems such as a very tight gap between door and frame, a latch that is difficult to move, a broken latch and so on … The advanced technique this tool uses, allows the opening of double-offset doors even in very difficult cases. Also closed but unlocked single-offset doors or difficult emergency exit doors (where the latch may be found at a great distance from the door blade) can be opened without greater efforts. For the easy insertion of the card between door and frame we recommend the use of the Door Lever (see end of this page), a tool that is also helpful in many other situations. Delivery includes two different cards of 0.35 and 0.50 mm. Replacement cards not including the handle are available. The cards are made of a special plastic and designed for long term use. 

Opening-Set for single- and double-offset doorsEvery locksmith knows the problem of closed double-offset doors. The new ACE spiral needles, made of high quality spring steel, allow the non-destructive opening of double-offset doors in most cases. The use is very simple: The tool is inserted in the narrow gap between door and frame by turning until it makes contact with the latch. Continued turning pushes back the latch. Usually this process does not cause any damages except a pierced sealing strip. The set consists of four (4) different tools for doors with the lock mounted either on the right or on the left and 2 different material strengths (1.5 and 1.7 mm) for the different types of offset door designs. Of course, the ACE-tools are very well suited for opening simple offset doors as well!For very tightly engaging (closing) double and simple offset doors the ACE-Mini-Set (2 pieces) of only 1.25 mm needle-strength is especially suited. 

Door Spy drill WS 15 mm Ingenious drill for split free drilling of 14 mm door spiesArt.-No.: 55304 

Door Spy drill WS 13 mm Ingenious drill for split free drilling of 12 mm door spiesArt.-No.: 55302   

The new Latch Opener Set (2 pieces: 1x 1.5mm and 1x 1.75 mm, made of spring steel wire, with handle) is especially designed for the opening of double-offset doors. After pulling the door out of its frame for a little distance, using the Multi-Opener, Door Lever or Suction Cup etc., the appropriate latch opener is inserted into the gap and pulled up into the direction of the latch. Be careful not to rip out the sealing while doing so. When touching the latch with the tool’s tip, twist the tip of the tool against the latch and the door will open. 

A practical high-quality real leather shoulder bag with zip for the transport and protection of the LockOff door peephole opener. 

Patented Opening Cards for Single and Double-Offset Doors Having to open closed but unlocked double-offset doors locksmith may face various problems such as a very tight gap between door and frame, a latch that is difficult to move, a broken latch and so on …The advanced technique this tool uses, allows the opening of double-offset doors even in very difficult cases. Also closed but unlocked single-offset doors or difficult emergency exit doors (where the latch may be found at a great distance from the door blade) can be opened without greater efforts. For the easy insertion of the card between door and frame we recommend the use of the Door Lever (Art.-Nr. 2320), a tool that is also helpful in many other situations. Delivery includes two different cards of 0.35 and 0.50 mm. Replacement cards not including the handle are available. The cards are made of a special plastic and designed for long term use. 

Patented Opening Cards for Single and Double-Offset DoorsHaving to open closed but unlocked double-offset doors locksmith may face various problems such as a very tight gap between door and frame, a latch that is difficult to move, a broken latch and so on …The advanced technique this tool uses, allows the opening of double-offset doors even in very difficult cases. Also closed but unlocked single-offset doors or difficult emergency exit doors (where the latch may be found at a great distance from the door blade) can be opened without greater efforts. For the easy insertion of the card between door and frame we recommend the use of the Door Lever (Art.-No.: 2320), a tool that is also helpful in many other situations. Delivery includes two different cards of 0.35 and 0.50 mm. Replacement cards not including the handle are available. The cards are made of a special plastic and designed for long term use.