Skip to main content Skip to search Skip to main navigation
Quality products since 1997
Worldwide shipping
Purchase on Account for Authorities
Phone +1 972 588 4362
Loading...

LockOff Door Peephole Opener Kit

Product information "LockOff Door Peephole Opener Kit"

The LockOff  Door Peephole Opener Kit - Now Being Manufactured By Multipick


From now on, the LockOff door peep hole opener kit will be manufactured by Multipick in superior Multipick quality.

However, we have kept the ingenious basic construction of the tool and simply reinforced the established weaknesses substantially. The Multipick LockOff has finally transitioned into a mature and durable tool, made in Germany.


Thanks to its sophisticated system, this high-quality lever tool allows the opening of locked doors, whether single or double-rebated. It is particularly effective for opening self-locking doors.


The included auxiliary tools, such as the “Special Pliers” and the “Peephole  Turbo-Helper”, which come in a high-quality shoulder bag for convenient transport and storage, are sufficient to open a door in the “blink of an eye” without causing any damage.


In our opinion, this opening tool should be a “must have” component of in the professional equipment carried by emergency key services.


Operation:
Before using this tool, you should find out which type of door handle is installed. Unfortunately, rotary door knobs are also not operable with this opening tool. First, the length of the LockOff  lever arm must be adjusted. To do this, it's necessary to re-adjust and fix the LockOff rod, adjusting it from the center of the peephole to a position in relation to its distance to the door handle. The angled lever arm rests on the inside door handle. The rubber stopper on its tip prevents damage in case it hits the door. The door handle can be operated by pressing on the outside arm. The calibration of the lever arm in front of the door is very important! If it's too short, the lever slips off the handle before it can be pressed down sufficiently. If it's too long, one cannot generate enough force to press the lever down. In case of misalignment, the inserted LockOff can easily be pulled out and re-adjusted. The door peephole can also be easily removed from the outside with the special cranked pliers; take care to prevent scratches when the pliers slide off onto the door panel. With the LockOff – Peephole Turbo-Helper developed by us, you can remove all standard door peepholes without causing any destructive damage, in no time at all. Simply clamp it into a drill or screwdriver and “unscrew” the peephole with the necessary counter-pressure.


Also, from now on, we will be offering a cost-effective modification, or repair  of your old LockOff. at a fixed price. All components with proven vulnerabilities will be replaced by new Multipick components, giving you a more robust and durable tool, including free express return shipping.


Images may differ from original.

 
Manufacturer "Multipick"

Multipick Direct GmbH
Godesberger Str. 51
53175 Bonn
Germany
Telephone: +49 228 39187 60
Telefax: +49 2283918741
E-Mail: [email protected]

Content:

  • 1 x Original Multipick Lockoff - Door Peephole Opener
  • 1 x Special Peephole Pliers
  • 1 x Peephole Turbo-Helfer
  • 1 x Allen Key 2.0 mm
  • 1 x Genuine Leather High-Quality Shoulder Bag
 

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Customers who bought this item also bought

In stock
Handle Catch 3.5 mm
The 3.5 mm Door Handle Lasso Tool is a classic opening tool designed for non-destructive entry through slammed doors. Thanks to its slim diameter, it can be guided through the gap beneath the door to reach the interior door handle, which is then operated via the pull cord to depress the handle from the outside. This allows access without damaging the lock or the door. The tool works particularly well on doors with sufficient clearance at the bottom edge (approx. 4 mm or more), or in combination with methods used to create or widen the gap. In many cases, this simple technique provides the quickest solution for opening a door that has merely been slammed shut. Further developed in collaboration with locksmiths and authorities, this tool remains a proven and practical standard solution for professional users who regularly deal with slammed doors. Dimensions: Pull cord length: 156 cm Handle section length: 25 cm Cord attachment section length: 11.5 cm Lever section length: 113 cm  
SKU#: 33993
Available

- Delivered within 1-9 days, depending on shipping method and country of delivery

In stock
Lifter Bridge
Lifter for security-fittings usually allow lifting of the security fitting in order to insert a square bolt knife into the gap and turn the handle mechanism.Normally this opening technique is only possible with simple fittings which are not screwed together. The device of the “Bridge” lifter for fittings is fixed to the exterior door handle. On regular pulling by use of the screws the fitting comes off the door leaf by a few millimeters. The adapted square bolt knife will be inserted to the gap and the lock will be opened by turning the square bolt. NEW! Highly durable and long lasting construction. Big advantage due to new special trapezoidal thread which makes it easy to tighten - this prevents the thread from "seizing". The regular and smooth pulling of the fitting by the 2 screws of the Bridge should be careful since pressure marks of the tools’ feet may occur in case of inattention! The respective square bolt knives (8 mm and 10 mm) are included. Also this tool is very well adapted together with our emergency set for broken latch. A 17 mm driver is needed in order to turn the screws lifting the fitting! The “Bridge” differs essentially from the other lifters on the market in the following ways:Assembly of high-value aluminiumDespite new light weight construction extremely loadableVery solid finishingExtremely high durabilityOptimal exertion and distribution of pulling forceBig advantage due to new special trapezoidal threadQuick identification of bolt diameter through millimeter markings    
SKU#: 3397C
Available

- Delivered within 1-9 days, depending on shipping method and country of delivery

In stock
Panic door opener Set, 2 pieces
The popular panic door opener is now available as a set for door opening right and left. No difficult operation anymore thanks to the coverage of all opening directions. Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities! Extending the door gap can accomplished e.g. with a strong siphon, door wedges or a door lever.Special:Spring steel blade, only 1mm thick. Also available individually33800 = Door use from the top right33805 = Door use from the top left  
SKU#: 33807
Available

- Delivered within 1-9 days, depending on shipping method and country of delivery

In stock
Opening Card Set - Long (2x 0.25 / 0.35 / 0.5 mm)
Trusted by fire brigadesThe latch opening cards in this set, with thicknesses of 0.25, 0.35, and 0.5 mm (2 pieces each), are made from a specially adapted plastic and precisely manufactured for their intended purpose. They allow for quick and uncomplicated opening of unlocked doors – especially when the gap is too narrow for opening needles.The elongated shape of these cards (dimensions: 230 x 80 mm) makes working on-site significantly more practical and ensures superior flexibility and handling – particularly when speed is essential. 
SKU#: 33911
Available

- Delivered within 1-9 days, depending on shipping method and country of delivery

In stock
Nylon Air Cushion
This compact air cushion (approx. 15 x 15 cm) is the perfect tool for precise work in tight gaps. Unlike conventional rubber models, it is made of high-quality nylon. A clear advantage: rubber tends to stick to car paint, especially in warmer temperatures, whereas nylon is significantly more gentle on surfaces. Thanks to its thin material, the air cushion can be easily inserted into narrow gaps, such as between a car door and its frame. It is ideal for use with snares or vehicle opening hooks. Inside, an integrated sturdy card provides the necessary rigidity without compromising flexibility. The valve and air release section are made of durable metal. A rounded corner further facilitates insertion. This useful tool stands out with its thoughtful design and Multipick quality. 
SKU#: 43011
Available

- Delivered within 1-9 days, depending on shipping method and country of delivery