Basi- CX 6 ARES lock opening tool

This tool was developed for opening and decoding vehicle locks in a one-step operation.Developed for vehicle locks mentioned below, this tool features a special profile that enables targeted picking of each individual disc of the cylinder. Once successfully opened, the code can be read from the scale on the tool and a key can be produced. One tool, three functions: Tensioning, picking and decoding.Suitable for:NISSANPixo 2009 and laterSUBARUG3X Justy as of 2004SUZUKIAlto 2008 and later, Grand Vitara 2008 and later, Ignis 2000-2008, Jimny 2002 and later, Splash Diesel 2008 and later, Swift 2005 and later, SX4 2006 and later & Wagon R 2000-2008 and later.VAUXHALL / OPELAgila as of 2000 

Wilka- W 3600 ARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the Wilka- W 3600 cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the Wilka- W 3600, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money. The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly. Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products. In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

Winkhaus- N-Tra ARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the Winkhaus- N-Tra cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the Winkhaus- N-Tra, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here.Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

The so called tensioner is one of two components that is used with disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. 

Abus- D6XARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the Abus- D6X cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the Abus- D6X, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

Manual TOPOLINO Decoder for SIDESE (PUMP)This Topolino Decoder is constructed with a specific structure for the SIDESE (PUMP) cylinder lock and consists of a blade with five uniquely positioned decoder pins.By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key.Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected.