ELITE G-Pro Replacement Flag – 14 “Short Thin Flat Flag”

The ELITE G-Pro Replacement Dimple Pick-13 (LR1) “Flat Flag” was developed exclusively for Multipick in collaboration with the renowned lockpicker Lock Noob.The tool is based on a unidirectional flat flag profile – one of the most versatile designs for manipulating dimple locks.The key feature lies in its alignment: the flag is perfectly in line with the shaft, resulting in an especially slim profile – ideal for tight tolerances and complex dimple locks.This geometry allows pins to be manipulated from both sides without losing torque control. This is a decisive advantage, particularly with high-security dimple locks that have multiple pin rows – such as top/bottom or side-by-side arrangements.Thanks to its dual-sided usability, the Flat Flag is suitable for left or right-hand operation, reducing the constant need to switch between different picks.High versatility, precise control even in narrow keyways, and optimal handling in complex locking systems – these are the strengths of this pick.Specifications:Flag length: 2 mmFlag width: 2.5 mmFlag offset: 0.00 mmFlag offset: 0.00 mmFlag orientation: left, rightBlade shank diameter: 1.15 mm 

The “Long Thin Flat Flag” replacement flag was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, particularly slim Flat Flag profile and offers the full reach of the original Long Flat Flags, while providing a finer working surface for more precise positioning.Its key feature is the slim geometry: the flag is designed to be long while remaining deliberately thin. This allows the flag to be guided more precisely between closely spaced pins and positioned cleanly in locking systems where space is limited. This is particularly useful for dimple locks with closely spaced pins or opposing pin rows. In such situations, the pick needs to find its way through the lock without constantly catching on neighbouring pins.With the flag aligned with the shaft, the profile remains slim and direct. This provides good guidance in the keyway and clear feedback while working. The thinner design really comes into its own when the flag needs to be guided between opposing pin stacks.The Long Thin Flat Flag is particularly well suited to high-security dimple locks. When pins are positioned very close together or the lock geometry requires precise positioning between components, this profile provides greater control and reduces unnecessary contact inside the lock. Thanks to its reversible design, the flag can be used equally well by left- and right-handed users, reducing the need to switch between different flags.Specifications:Flag length: 3 mmFlag width: 1.5 mmFlag offset: 0.00 mmFlag orientation: left, rightShaft diameter: 1.15 mm 

The “Half Diamond Flat Flag” replacement flag was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, flat flag profile with a finely tapered Half Diamond geometry, a shape that really comes into its own when pins need to be set precisely with minimal contact area.Its key feature is the combination of reach and precision: the flag has the same working length as the Long Flat Flags but tapers significantly towards the tip. This allows the flag to be guided precisely towards individual pins without creating unnecessary contact inside the lock. This is particularly advantageous for high-security dimple locks with tight tolerances, multiple pin rows, or very sensitive feedback.With the flag aligned with the shaft, the profile remains slim and direct. The flag can be guided smoothly, provides clear feedback, and helps you position individual pins precisely. Thanks to its reversible design, it can be used equally well by left- and right-handed users, reducing the need to switch between different flags.Its strengths lie in the fine Half Diamond tip, its long reach, and its precise handling when working with demanding locking systems.Specifications:Flag length: 3 mmFlag width: 2.0 mmFlag offset: 0.00 mmFlag orientation: left, rightShaft diameter: 1.15 mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 1.60mmFlag width: 1.40 - 1.60mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mm 

Blades for picking single pin in deep positionsWelcome to professional high classThe ultimate Lock Picks in worldwide unrivaled High-Tech qualityFinest blades – ingenious spring steel – perfect finishingHigh quality individual design - Perfection in every detail100% Made in Germany – By Multipick, of course We invite you to test it! Give it a try! Technical data:Pick type: HookBlade thickness: 0.5 mmLength: 120 mmWeight: 8 gr.Material Blade: excellent quality spring steelMaterial Handle: excellent quality stainless steelOur ELITE picks are rust-free thanks to a special hardening and tempering process.