Handle Lever for Chubb, lever and warded locks

Handle levers are important tools in cases of mechanical defects of the lock. Unfortunately this type of problem is very common and presents a great challenge to locksmiths. With the help of the door handle lever the latch can be activated by pushing down the handle on the other side of the door, thus opening the door. This unique tool, therefore, is a very simple solution to a difficult problem. 

3370 - The “classic” lever pick opens most warded locks3371 - A special configuration - designed for the unlocking of locking mechanisms where the latch or bolt is broken.Brilliant Quality "Made in Germany" by ©Multipick 

Use the double suction cup to move the window/door to be opened from the inclined position to the vertical position quickly and easily, and then open it using the Kipp-Blitz tool.Special highlight for professional use on site: Use your Kipp-Blitz tool bag to hang directly on the window for fast, safe and efficient working.• With quick-release, fastening lever • Holding strength up to 100 kilograms 

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!! 

The popular panic door opener is now available for doors opening to the left and to the right. The easiest direction for opening is to go from the top towards the bottom of the door. Now this is possible with both right and left hand doors. No more complicated handling thanks to the two different directions in which you can now select from, left or right, depending on the direction the door is opening to.Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities!The tool is made from 1 mm spring steel. 33800 = Door use from the top right33805 = Door use from the top left