Lock Puller QA Pro 2 including 30 pull screws

THE NEW V-PRO SELF-TAPPING EXTRACTION-SCREWS Manufactured according to the latest state-of-the-art technical expertise Very powerful!High tensile strength and breaking load, combined with a high degree of torsion Our most economical customer uses our screws repeatedly up to 6 times - what should we do about this? No pre-drilling required! (self-tapping)It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coatingOptimized thread geometry and screw length!Maximum retention force in each cylinder profileOne-handed screw-in without a ScrewFix bit adapter!Whether by hand or cordless electric screwdriver, via its patented SIT® 20-bit drive (fully downward compatible with TORX20) A great advantage of the SIT 20 drive is that the screw can be driven in with one hand and without a screw adapter. Those who have ever had to thread in screws of other manufacturers will love this advantage! Having a high speed on the drill and applying pressure on the screw is advantageous for easy threading of the V-PRO extraction screw! DELTA SEAL® High-tech color anti-friction coating!The anti-friction coating supports easy screw-in actionAn individual colour scheme for each screw sizeCorrosion protection Important! Experience has shown that a lubricant is often used to assist in threading the screw. This is not necessary with V-PRO extraction screws and in fact is counterproductive.Our screw has an anti-friction coating that does not require a lubricant. If additional lubrication is used, it can lead to the shavings becoming clumped which can no longer be eliminated. V-PRO screws have an impression stamped into the screw-head! Latest technology — Made in Germany!We guarantee the highest qualityDepending on the ordered quantity, the screws will be sent either in boxes or sachets. In this packaging unit we include a SIT20 quality bit. 

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors. 

A Wiha Torx T-20 T-Key or Bit is required for the screw-driving the pull screws.  

Reinforcement rings for pull screws (Set - 5 pieces) 

This special tool developed for locksmiths and government agencies allows the easy and hassle-free removal of all types of cylinder locks (profile, round and oval cylinders). The ‘’Bell‘’ enables the door to be opened quickly without damaging the door or the fitting.In combination with the included core pulling plates, the cylinder core alone can be easily extracted from the housing so that the locking mechanism can be actuated without any difficulty. Especially with half cylinders, such as those found on glass doors, garage doors, alarm systems, shutters etc., to save time, deploying the "Bell" is often the only option when it comes to opening the door in an emergency. As the device works with a single and centrally oriented pulling-mechanism, there are no lateral forces during the actual pulling. This prevents the special extraction screws from jamming or snapping.For its compact and robust design and the effective mode of operation, the "Bell" is considered one of the best plug-pulling devices among professionals around the world. The "Bell" is made of hardened steel to ensure years of use.The tension rod is equipped with a hardened trapezoidal thread that enables precise operation and improved load bearing. Compared to the conventional fine thread, this new thread is more durable and allows faster and more precise operation without losing any torque due to the greater thread pitch. Furthermore, the rougher trapezoidal thread is less susceptible to brass shavings.If you should ever need spare parts, just give us a call! We constantly have all spare parts in stock.Care instructions for Multipick Bell (Please pay attention to these instructions!) Just like any other tool, our lock puller "Multipick Bell" also requires care. This means that the ball bearing and the tension rod as well as all moving parts should be kept free of metal shavings after each use and regularly treated with lubricating grease. You can either apply it by means of a brush or, alternatively, using a similar spray grease.