WOPER-Window opener

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors. 

With this revolutionary tool, plastic windows that are shut can be opened from outside without destroying it. First, by means of a latch opening card or an opening needle, the position of the roller pin or mushroom head lock is determined. Next, the pivot puller is inserted into the rebate, then pushed upwards and "tilted" backwards to grip the pivot / mushroom head lock. With this revolutionary tool, plastic windows that are shut can be opened from outside without destroying it. The first step is to locate the position of the pivot or mushroom head lock by means of a latch opening card or an opening needle. Next, the pivot puller is inserted into the rebate, then pushed upwards and "tilted" backwards to grip the pivot / mushroom head lock. Finally, the provided flat ribbon is inserted through the handle eyelet and "knocked" downwards with a round object, causing the window handle to move into the open position. Attention! Cannot be used with wooden windows, as these always consist of a double rebate. 

Ideal accessory for the installation of new fittings, locks and cylinders. Essential tool for the exact adjustment of fitting, lock and cylinder for new installations. Length approx. 200 mm. 

Opening-Set for single- and double-offset doorsEvery locksmith knows the problem of closed double-offset doors. The new ACE spiral needles, made of high quality spring steel, allow the non-destructive opening of double-offset doors in most cases. The use is very simple: The tool is inserted in the narrow gap between door and frame by turning until it makes contact with the latch. Continued turning pushes back the latch. Usually this process does not cause any damages except a pierced sealing strip. The set consists of four (4) different tools for doors with the lock mounted either on the right or on the left and 2 different material strengths (1.5 and 1.7 mm) for the different types of offset door designs. Of course, the ACE-tools are very well suited for opening simple offset doors as well!For very tightly engaging (closing) double and simple offset doors the ACE-Mini-Set (2 pieces) of only 1.25 mm needle-strength is especially suited. 

With this cylinder gauge Multipick proposes a handy measuring tool to the professional locksmith. In only one process cylinder lock lengths on both sides are measurable fast and precisely.Solid Aluminium/Steel construction with easy readable length scale. For doors up to 180 mm thick.Weight: 180 grams