Coupling Actuator

This practical tool enables you to remove pins, springs and fragment residues from the milling or drilling passage. 

The auxiliary milling key is designed to address malfunctions that occur after the milling process.For cylinders with emergency and danger functions, the cam coupling is held in place by pressing the auxiliary milling key into the center of the cylinder while turning it. If the coupling becomes stuck, a light tap with a hammer can help release it.For standard cylinders, vibrations during the milling process may cause the coupling to shift forward. To resolve this, hold the keyway in a vertical position and use the auxiliary milling key to push the coupling inward, allowing the cam to rotate freely.If a key is lodged inside the cylinder, use a 1 mm pointed spring steel wire, such as our Coupling Actuator (SKU: 3138), which can be purchased separately. Press the wire against the edge of the core while simultaneously turning the auxiliary milling key to move the cam. 

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!! 

This newly developed screw-driving adapter fixes the pull-screw in its refined screw holder and, allows the fast, comfortable and one-handed screw-driving of the pull-screw into the lock cylinder. After the insertion of the pull-screw into the plug the adapter can be removed easily. A very useful additional tool! The exchangeable standardized bit makes the tool useful for any type of screws. For the use with automatic screw machines etc. 

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!!