- New Arrivals
- Opening & Entry Tools
- Automotive Opening
- Drills & Milling Tools
- Fire Department & Authorities
Cylinder Milling
Lock Cylinder Milling - Destructive Door Opening
The spherical bur is a standard tool usd by locksmiths. By using a spherical bur and special milling bur, the entire cylinder can be removed. For this particular opening technique, Multipick recommends Makita straight grinders such as e.g. the Makita DGD800. After the door has been opened, the cylinder must be replaced.
Only 2 available
Emergency Opening Module 4 "Milling"
We have put together an unbeatable milling set for you! M4 Multipick's milling bag - A complete set for milling cylinders, but not just for fire brigades! Small, practical and safely packed - always ready to go! Technical data:Idle speed: 26.000 min-1Collet chuck: 6 mmApplication tool max.: 36 mmBattery voltage: 18 VDimensions (L x W x H) mm: 402 x 82 x 118Battery voltage: 18 VWeight: 2.0 kg
SKU#: 22112-M4
only 2 available
- Lead time: 1-2 days
only 2 available
Only 1 available
Makita cordless rotary hammer DHR243Z with charger and 2 batteries
Brushless, three-mode rotary hammer with quick-change chuck An efficient, powerful rotary hammer with an anti-vibration handle and quick-change chuck that accepts SDS-PLUS bits. Suitable for impact and unstressed drilling, plus chipping. Speed range of 0 – 950 min-1. Impact energy of 2.0 J and max. drilling capacity of 24 mm in concrete. Features • Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in high production applications• Quickly attaches to Makita's DX02 dust extraction system for dustless drilling applications in sensitive work environments (DX02 sold separately) • Torque limiter stops bit rotation if bit jams for increased operator safety and enhanced tool protection• Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact• 40 angle bit positions enable chisels to be positioned at optimum angle of operation• Plastic housing bumper protects mode selector switch and gear housing from damage• One touch sliding chuck enables quick and easy bit changes• Ergonomic soft rubber grip design for vibration absorption and comfortable operation Technical specifications • Nominal Battery Voltage: 18 V• Voltage: LXT• Brushless Motor• Impact Energy: 2.0 J• Optimum Drilling Diameter Range in Concrete: 6 - 12 mm• Max. Drilling Diameter in Concrete: 24 mm• Max. Drilling Diameter in Wood: 27 mm• Max. Drilling Diameter in Steel: 13 mm• Impacts per Minute (IPM): 0 - 4700 min⁻¹• No load speed: 0 - 950 min⁻¹• Sound Power Level (LWA): 100 dB(A)• Sound Pressure Level (LpA): 89 dB(A)• Noise Uncertainty (K Factor): 3 dB(A)• Vibration Level, Chiselling: 11.2 m/s²• Product Dimensions (L x W x H): 353 x 85 x 213 mm• Vibration Level, Hammer Drilling Into Concrete: 15.8 m/s²• Drilling diameter with TCT core bit: 54 mm• Adapted for SDS-PLUS bits• Tool weight with battery: 3.4 - 4.,9 kg• Vibration Uncertainty (K Factor), Hammer Drilling Into Concrete: 1.5 m/s²• Vibration Uncertainty (K Factor), Chiselling: 1.5 m/s²• Battery Chemistry (Ni-Cd / Ni-MH / Li-ion): Li-ion• Electronic brake
SKU#: DHR243Z+
only 1 available
- Lead time: 1-2 days
only 1 available
Only 1 available
Makita cordless angle grinder DGA511Z with charger and 2 batteries
High Performance and efficiency brushless 5" angle grinder with variable speed for heavy-duty grinding applications Very compact cordless angle grinder with 18 V drive and a disc diameter of max. 125 mm for demanding, professional applications. Equipped with AFT and ADT. The speed is electronically adjustable. With restart protection. Features • Automatic torque Drive Technology (ADT) adjusts the torque and speed according to the load condition, enabling rapid movement between high speed and high torque applications• eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions• Active Feedback sensing Technology (AFT) automatically shuts down the tool if there is a sudden drop in rotation speed (e.g. kick-back)• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications• Anti-restart feature prevents accidental start up of tool during battery changing when switch is locked in the on position• Soft start feature gradually increases speed to eliminate start up shock• Variable speed dial enables operator to adjust wheel speed based on materials or application• Electronic current limiter protects motor from accidental overload• Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life, and overall battery life• Integrated dust screens act as additional protection against dust, dirt and debris• Ergonomic soft rubber grip design for vibration absorption and comfortable operation Technical specifications • Battery capacity 18 V • Battery system LXT • Battery type Li-ion • Brushless motor • Max. power output 660 W • No load speed: 3000 - 8500 min-¹ • Spindle thread M14 • Abore 22.23 mm • Max. disc Ø 125 mm • Restart protection • Vibration levels, surface grinding ≤ 2.5 m/s² • Vibration uncertainty factor (K value), surface grinding 1.5 m/s² • Vibration levels, surface grinding (roughing) 6.5 m/s² • Vibration uncertainty factor (K value), surface grinding (roughing) 1.5 m/s² • Product dimensions (L x W x H) 382 x 140 x 145 mm • Weight incl. battery 2.3 - 3.0 kg • Max. cutting depth 29 mm
SKU#: DGA511Z+
only 1 available
- Lead time: 1-2 days
only 1 available
Makita DGD800 18Volt LXT complete kit
An all-round bundle at an unbeatable price!With this complete Makita Die Grinder set, you can get to work straight away. The two rechargeable batteries provide ample power and can be charged interchangeably with the charger.Features: • Spindle housing made of die-cast aluminium with 35 mm Ø collar • Euro collet 43 mm Ø • Particularly slim housing, easy to grip • Additional 3 mm and 8 mm collets available as accessories • Slide switch for convenient one-handed operation • Anti-restart feature with warning light prevents the machine from starting when the battery is inserted and switches on when the capacity is insufficient • Supplied in a cardboard boxTechnical Data: • Operating mode: Battery operated • Battery power: 18Volt • Collet chuck: 6 mm • No-load speed: 26,000 min-1 • Weight: 2.0 kgThe scope of delivery includes: • 2 Makita BL1850B, 197280-8 18V / 5.0Ah rechargeable batteries, sliding battery with LED charging indicator • 1 Charger Makita DC18RC, 195584 for 14.4 - 18.0V sliding batteries
SKU#: DGD800Z+
Out of stock - available again in a few days
Out of stock - available again in a few days
Makita cordless drill driver DDF485 with charger and 2 batteries
A powerful, brushless general-use drill for screwdriving and drilling A powerful brushless tool with two speeds for screwdriving and drilling for professional use. Max. torque of 50 / 25 Nm. A versatile tool for fitters, builders and maintenance staff. Integrated LED light. Features • eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications• Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life• 21 clutch settings deliver up to 440 in. lbs. of torque• All metal gears and gear housing for more efficient power transmission• Ultra-compact design (only 6-5/8" long)• Dual LED job lights with preglow and afterglow features• Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold Technical specifications • Nominal Battery Voltage: 18 V• Voltage: LXT• Brushless Motor• No load speed: 0 - 500 / 0 - 1900 min⁻¹• Max. fastening torque: Hard/Soft 50 / 27 Nm• Torque setting: 21• Max. Drilling Diameter in Wood: 38 mm• Max. Drilling Diameter in Steel: 13 mm• Driving Shank: 1/2"-20UNF "• Drill Chuck Capacity: 1,5 - 13 mm• Sound Pressure Level: (LpA) 74 dB(A)• Noise Uncertainty (K Factor): 3 dB(A)• Tool weight with battery: 1,4 - 1,7 kg• Product Dimensions: (L x W x H): 169 x 79 x 255 mm• Vibration Level, Drilling into metal: ≤ 2,5 m/s²• Vibration Uncertainty (K Factor), Drilling into metal: 1,5 m/s²• Drilling Capacity Wood (Auger Bit): 38 mm• Drilling Capacity Wood (Self-feed bit): 76 mm
SKU#: DDF485+
Out of stock - available again in a few days
Out of stock - available again in a few days
Only 1 available
Makita cordless rotary hammer DHR243Z w/o battery & charger
Brushless, three-mode rotary hammer with quick-change chuck An efficient, powerful rotary hammer with an anti-vibration handle and quick-change chuck that accepts SDS-PLUS bits. Suitable for impact and unstressed drilling, plus chipping. Speed range of 0 – 950 min-1. Impact energy of 2.0 J and max. drilling capacity of 24 mm in concrete. Features • Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in high production applications• Quickly attaches to Makita's DX02 dust extraction system for dustless drilling applications in sensitive work environments (DX02 sold separately) • Torque limiter stops bit rotation if bit jams for increased operator safety and enhanced tool protection• Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact• 40 angle bit positions enable chisels to be positioned at optimum angle of operation• Plastic housing bumper protects mode selector switch and gear housing from damage• One touch sliding chuck enables quick and easy bit changes• Ergonomic soft rubber grip design for vibration absorption and comfortable operation Technical specifications • Nominal Battery Voltage: 18 V• Voltage: LXT• Brushless Motor• Impact Energy: 2.0 J• Optimum Drilling Diameter Range in Concrete: 6 - 12 mm• Max. Drilling Diameter in Concrete: 24 mm• Max. Drilling Diameter in Wood: 27 mm• Max. Drilling Diameter in Steel: 13 mm• Impacts per Minute (IPM): 0 - 4700 min⁻¹• No load speed: 0 - 950 min⁻¹• Sound Power Level (LWA): 100 dB(A)• Sound Pressure Level (LpA): 89 dB(A)• Noise Uncertainty (K Factor): 3 dB(A)• Vibration Level, Chiselling: 11.2 m/s²• Product Dimensions (L x W x H): 353 x 85 x 213 mm• Vibration Level, Hammer Drilling Into Concrete: 15.8 m/s²• Drilling diameter with TCT core bit: 54 mm• Adapted for SDS-PLUS bits• Tool weight with battery: 3.4 - 4.,9 kg• Vibration Uncertainty (K Factor), Hammer Drilling Into Concrete: 1.5 m/s²• Vibration Uncertainty (K Factor), Chiselling: 1.5 m/s²• Battery Chemistry (Ni-Cd / Ni-MH / Li-ion): Li-ion• Electronic brake
SKU#: DHR243Z
only 1 available
- Lead time: 1-2 days
only 1 available
Only 1 available
Makita cordless angle grinder DGA511Z w/o battery & charger
High Performance and efficiency brushless 5" angle grinder with variable speed for heavy-duty grinding applications Very compact cordless angle grinder with 18 V drive and a disc diameter of max. 125 mm for demanding, professional applications. Equipped with AFT and ADT. The speed is electronically adjustable. With restart protection. Features • Automatic torque Drive Technology (ADT) adjusts the torque and speed according to the load condition, enabling rapid movement between high speed and high torque applications• eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions• Active Feedback sensing Technology (AFT) automatically shuts down the tool if there is a sudden drop in rotation speed (e.g. kick-back)• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications• Anti-restart feature prevents accidental start up of tool during battery changing when switch is locked in the on position• Soft start feature gradually increases speed to eliminate start up shock• Variable speed dial enables operator to adjust wheel speed based on materials or application• Electronic current limiter protects motor from accidental overload• Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life, and overall battery life• Integrated dust screens act as additional protection against dust, dirt and debris• Ergonomic soft rubber grip design for vibration absorption and comfortable operation Technical specifications • Battery capacity 18 V • Battery system LXT • Battery type Li-ion • Brushless motor • Max. power output 660 W • No load speed: 3000 - 8500 min-¹ • Spindle thread M14 • Abore 22.23 mm • Max. disc Ø 125 mm • Restart protection • Vibration levels, surface grinding ≤ 2.5 m/s² • Vibration uncertainty factor (K value), surface grinding 1.5 m/s² • Vibration levels, surface grinding (roughing) 6.5 m/s² • Vibration uncertainty factor (K value), surface grinding (roughing) 1.5 m/s² • Product dimensions (L x W x H) 382 x 140 x 145 mm • Weight incl. battery 2.3 - 3.0 kg • Max. cutting depth 29 mm
SKU#: DGA511Z
only 1 available
- Lead time: 1-2 days
only 1 available
Only 4 available
Makita DGD800Z Die Grinder 18Volt LXT w/o battery
Features: • Spindle housing made of die-cast aluminium with 35 mm Ø collar • Euro collet 43 mm Ø • Particularly slim housing, easy to grip • Additional 3 mm and 8 mm collets available as accessories • Slide switch for convenient one-handed operation • Anti-restart feature with warning light prevents the machine from starting when the battery is inserted and switches on when the capacity is insufficient • Supplied in a cardboard boxTechnical Data: • Operating mode: Battery operated • Battery power: 18Volt • Collet chuck: 6 mm • No-load speed: 26,000 min-1 • Weight: 2.0 kg
SKU#: DGD800Z
only 4 available
- Lead time: 1-2 days
only 4 available
Only 1 available
Makita cordless drill driver DDF485 w/o battery & charger
A powerful, brushless general-use drill for screwdriving and drilling A powerful brushless tool with two speeds for screwdriving and drilling for professional use. Max. torque of 50 / 25 Nm. A versatile tool for fitters, builders and maintenance staff. Integrated LED light. Features • eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications• Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life• 21 clutch settings deliver up to 440 in. lbs. of torque• All metal gears and gear housing for more efficient power transmission• Ultra-compact design (only 6-5/8" long)• Dual LED job lights with preglow and afterglow features• Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold Technical specifications • Nominal Battery Voltage: 18 V• Voltage: LXT• Brushless Motor• No load speed: 0 - 500 / 0 - 1900 min⁻¹• Max. fastening torque: Hard/Soft 50 / 27 Nm• Torque setting: 21• Max. Drilling Diameter in Wood: 38 mm• Max. Drilling Diameter in Steel: 13 mm• Driving Shank: 1/2"-20UNF "• Drill Chuck Capacity: 1,5 - 13 mm• Sound Pressure Level: (LpA) 74 dB(A)• Noise Uncertainty (K Factor): 3 dB(A)• Tool weight with battery: 1,4 - 1,7 kg• Product Dimensions: (L x W x H): 169 x 79 x 255 mm• Vibration Level, Drilling into metal: ≤ 2,5 m/s²• Vibration Uncertainty (K Factor), Drilling into metal: 1,5 m/s²• Drilling Capacity Wood (Auger Bit): 38 mm• Drilling Capacity Wood (Self-feed bit): 76 mm
SKU#: DDF485
only 1 available
- Lead time: 1-2 days
only 1 available
Only 9 available
Makita Li-Ion rechargeable battery LXT - 18V - 5.0Ah
Technical data:Battery system: LXTModel: BL1850BBattery voltage: 18 VoltBattery capacity: 5 AhCapacity: 90 WhBattery type: Li-IonWeight: 0.60 kgDimensions (L x W x H): 113 x 75 x 62Specification:With battery charge level indicatorCertified German article
SKU#: BL1850B
Available ex stock
- Lead time: 1-2 days
Available ex stock
Only 6 available
Procut-Milling Burr 6 x 150 mm / 18 mm
Technical features:Material: Solid carbide Form: cylindrical d1: 6.0 mm I1: 18.0 mm d2: 6.0 mm I2: 150 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities: tough and high-strength materialalloyed steel casting synthetic material universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan
SKU#: 6327
Available ex stock
- Lead time: 1-2 days
Available ex stock
Only 10 available
Sale
Procut-Milling Burr 6 x 120 / 18 mm
Technical features:Material: Solid carbide Form: rund roller form d1: 6.0 mm I1: 18.0 mm d2: 6.0 mm I2: 120 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities: tough and high-strength materialalloyed steel casting synthetic material universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan
SKU#: 6326
Available ex stock
- Lead time: 1-2 days
Available ex stock