Door Latch Pick Needle Set 4-piece

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors. 

For the easy opening of “only” closed but unlocked doors. Small, very efficient and almost indestructible set of needles. The best we know! 

A single set for many door-opening possibilities. This 9-piece set offers you the answer to the most common door-opening issues. Due to the varied bendings of the 1.7 mm wires, there will certainly be a suitable wire for your task. A set that should be part of every locksmith's tool kit.Scope of Delivery:• 1x Standard double rebate wire needle• 1x Double rebate wire needle for rebate windows• 1x Standard single rebate wire needle• 1x Single rebate wire needle for fire resistant doors• 1x Single rebate wire needle for aluminium doors• 1x Single rebate wire needle for uPVC doors• 1x Single rebate wire needle for uPVC/metal doors• 1x Single rebate wire needle for panic doors (outward opening)• 1x Spring wire for cylinder clutch and for dismantling BKS round cylinders 

The popular panic door opener is now available as a set for door opening right and left. No difficult operation anymore thanks to the coverage of all opening directions. Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities! Extending the door gap can accomplished e.g. with a strong siphon, door wedges or a door lever.Special:Spring steel blade, only 1mm thick. Also available individually33800 = Door use from the top right33805 = Door use from the top left