ELITE Super Lock Pick Set 37-pcs.

The Multipick ELITE SHANK quickly opens a large variety of everyday locks including most Filing Cabinets and Tool Chests! When used properly the SHANK will open the lock within seconds without any damage. Simply insert the SHANK through the key way and wiggle while turning the knife releasing the locking pawl and opening the lock.The Multipick ELITE Shank works on the following models and many more:File Cabinets & Tool ChestsHonWaterlooHudsonStanleyS&GYaleChicago6842CraftsmanEagleHuskyFraim PadlocksSlaymakerHerculesLudell,Master 77Sargent 752HS & 753HSTaylor 781 padlocks 

The LAB Pinning Mat is a work mat for locksmiths and lockpickers. The mat provides various working areas so that several cylinders or practice locks can be worked on at the same time. Each section has various small pockets and oblong chambers for spring pins and pins, which can be easily picked up with tweezers. The main working area has various elevations and edges to accommodate all kinds of bits and pieces. The back of the mat is designed to provide a good grip on most surfaces to prevent it from moving. Each mat features:Re-designed base with gritty texture for better grip and retrieval of loose pins.Multiple double-sided textured pin retention areasTwo wedge-shaped sections for inserting cylinders Dimensions (L x W x H): 53.34 x 27.94 x 1.00 cm Material: Polyvinyl Weight: 0.77 Kg 

The Multipick ELITE Ultradecoder is designed to decipher the combination of multi wheeled locks. By placing the Ultradecoder on the axle that runs through the wheels inside the lock the operator can feel for changes in the features of the axle. Flat spots or grooves on the axle can be felt by the Ultradecoder as the operator spins the wheels. These flat spots or grooves will reveal the locks combination. By using the decoder on the axle beside each wheel the operator can line up all the flat spots or grooves to the same position. When this is done the combination will be set. The final step is to move combination into the correct position. Simply roll each wheel down one position and test the lock to open. Repeat this process until it does open.The Ultradecoder is made from thin high test steel with a solid steel handle.This decoder can also be used to depress the locking bar inside the Master 175 and other similar models quickly opening the lock. 

The exercise cylinder from Multipick - now with 6-pin chambers and plenty of possibilities. Thanks to its modular structure and side slots, our training cylinder is perfect for teaching yourself how to pick challenging locks and for taking your skills to the next level. Our classic practice cylinder is now available in a 6-pin version that offers you even more training options. Even the standard pin version of this practice lock is quite a challenge and requires a lot of know-how to pick it. If you wish to increase the difficulty or make it less challenging, then you can decide for yourself the degree of difficulty at any time by means of the fastening screws. Re-pinning the practice lock is easy peasy: Simply loosen the grub screws with the provided allen key and replace the springs and pins. After that, simply screw the grub screws back in and your new challenge with your training lock is ready. The set contains the required set of pins including a pair of tweezers in the scope of delivery. In this way, you can instantly adapt your training cylinder to your own needs. This makes this exercise lock a real challenge with countless possibilities. Always adapt your training to further improve your skills.  The cylinder in this set is slotted on one side. The other side is kept as it is in order to increase the level of difficulty. This gives you the choice of whether you want to exercise visually or without seeing anything. A training lock that offers a wide range of possibilities and will take your lockpicking skills to a new level. Without any exception, only very high quality and precise cylinder locks are used for the production. Brilliant and precise fine mechanics from Multipick - Made in Germany, Made in Bonn. Features:- Train like a pro and progress from novice to a professional- Complete 6-pin set with accessories for yet more possibilities- Learn and understand more through the half-open design of the Europrofile training locks- Compatible with our pinning kits available in our shop Dimensions: 30 / 10 / 30 mm When you use an electric lock pick gun with our practice locks, it is important to check the grub screws regularly because they can loosen due to the strong vibrations.  

Our wave rakes represent years of research and development. Based on various wave rakes which are commercially available, and in combination with initial mathematical modelling and final analysis on several prototypes, we created these impeccably crafted wave rakes. Like all lock picks from Multipick, they are made of the finest spring steel, in unrivaled high-tech quality in 0.6 mm-thickness. The waves of the rakes have a length of 25.4 mm in order to eliminate the normally required precise insertion depth and to facilitate simultaneous interaction with 7-pins. The wave rakes are equally tapered from the shaft to tip in order to maximize strength and to eliminate stress concentrations that cause lesser picks to snap. The long plow tip lifts pin 1 instead of bumping into it head on. With a good technique, prompt openings are often possible.Our new wave rake profiles are based on Christina Palmer's original (2019) quint cycloid and quint sinusoidal waves, which were designed by her and a group of PhDs. To achieve this, advanced Mathematica software was used to create an exact tapered wave effect. Christina Palmer is known for her great passion for locksport. She combines her personal experience with the laws of physics, applying both to the development of these two sophisticated profiles. We would like to thank Ms. Palmer for endowing us with her wave rake and tension wrench designs.    Digression:Cycloid curves characterise the wave forms as they can be precisely defined and drawn using parametric equations in CAD programs and have characteristics that lead to useful wave rakes. For example, cycloids are the curves created by the spirograph drawing tool, and also represent the curve of the fastest descent under constant gravity. Many cycloid wave forms were tested to determine the optimal parameters. Most commercially available wave rakes have sharp tips and steep slopes that make smooth raking challenging and also damage the pins. Our short cycloid wave rakes with a sine/cosine ratio of 0.25 provide non-slip action, making it ideal for simple basic locks. Our sinusoidal wave rakes with a sine/cosine ratio of 0 offer gentle action, ideal for hard locks. Both wave forms are available in a quad version for large locks and a quint version for small locks.While the long cycloid wave rakes are recommended for normal use, and the long sinusoidal wave rakes for gentle use. Short cycloid wave rakes are intended for fine raking.Caution! The aggressive cycloid wave rakes are sharp like a saw and can damage the pins and the entire lock. 

A single set for many door-opening possibilities. This 9-piece set offers you the answer to the most common door-opening issues. Due to the varied bendings of the 1.7 mm wires, there will certainly be a suitable wire for your task. A set that should be part of every locksmith's tool kit.Scope of Delivery:• 1x Standard double rebate wire needle• 1x Double rebate wire needle for rebate windows• 1x Standard single rebate wire needle• 1x Single rebate wire needle for fire resistant doors• 1x Single rebate wire needle for aluminium doors• 1x Single rebate wire needle for uPVC doors• 1x Single rebate wire needle for uPVC/metal doors• 1x Single rebate wire needle for panic doors (outward opening)• 1x Spring wire for cylinder clutch and for dismantling BKS round cylinders