ELITE Tension Wrench Set - 8 pcs. in a case

The special ELITE Top of the Keyway (TOK) Prybar Wrench Set 2 from Multipick is a combination of flat tension bars and heavy bars.All seven tensioners are made of high-quality steel and provide very good feedback when picking, due to their flexibility and hardness. The different shapes and lengths offer a wide range of opening options.The first three tools in the set are flat tension bars (SP11 to SP13, see pictures) offer a type of control that is often required, depending on the shape and condition of the lock. Some of them have teeth that are designed to increase the grip on the lock core.The four heavy bars (SP14 to SP17, see pictures) are designed for perfect tension control of the lock core. As with all types of tensioners that might be used for a specific lock, the following rule still applies: the closer the fit, the more control you will have over the lock core. Better control increases the frequency of feedback and facilitates minor adjustments.MP3SP11 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min 2.4 mm + max. 2.8 mmThickness: 0.6 mmTotal length: 76 mmWeight: 2 gMP3SP12 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 0.8 mmTotal length: 76 mmWeight: 2.5 gMP3SP13 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.0 mmTotal length: 76 mmWeight: 2.5 gMP3SP14 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.2 mmTotal length: 76 mmWeight: 3.5 gMP3SP15 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 3.9 mm + max. 4.2 mmThickness: 0.7 mmTotal length: 75.9 mmWeight: 2.0 gMP3SP16 Doublesided tension toolTechnical data:Side length: : 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 0.8 mmTotal length: 76.2 mmWeight: 2.5 gMP3SP17 Doublesided tension toolTechnical data:Side length: 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 1.2 mmTotal length: 76.2 mmWeight: 3.5 g Dimensions: 52 x 145 x 14 mmThis set is the perfect companion to our already "legendary" ELITE picks. 

Welcome to the professional league The coronation of Multipick's ELITE turners This set would be Lock Noob's choice if he were to put together a set from the 52 turners we have in our portfolio. So, taking his advice, we have introduced our Multipick ELITE Tension Set 3 to the Locksport community. As one would expect, the 16 tensioners are all made out of high-quality steel and provide an excellent feedback during picking due to their flexibility and hardness. The various forms and lengths allow a wide range of opening possibilities and comes in a handy genuine leather case. The ultimate tensioner set in worldwide unrivalled high-tech quality.High-quality individual design - perfection down to the last detailNo duplicate turners30 years warranty if used properly100% Made in Germany - Made in Bonn - by Multipick of course. 

The Flip-It - a development with high utility value Now in a revamped version for even more precise triggering and better handling For the new Flip-It we did not only concentrate on an extraordinary design, but also on the mechanical precision of the trigger system. What always disturbed us with other plug spinners on the market was that they tend to jam when trigered, which prevents the free turning of the cylinder core over the dot. This problem is principally due to a careless finish of the trigger mechanism, often coupled with cumbersome fixation of the control element. The engineers of Multipick took over this problem into consideration and found a perfect solution. The mechanism of the new Flip-It enables the “shot” release, simply through a gentle push of the trigger button. The advantage is that you can work without the exertion that was generally necessary until now. This tool enables precise and calm working. The Flip-It impresses with its highly qualitative aircraft grade aluminium (EN AW-7075) production. This product, with its combination of spring steel, proved for durability, and rubber rings of silicium, for non-slip guaranty, is an absolute highlight and an essential tool for any Lock pickerFine precision engineering "Made in Germany" by ©Multipick  

The perfect combination of a Euro profile cylinder and a Dimple cylinder - unique and only from Multipick Something that was impossible for most a while back is now becoming a reality: Controlled practice to overcome the difficulties of a Dimple cylinder and a Euro profile cylinder. Thanks to the modular structure and side slots, our training locks are perfect for educating yourself how to pick difficult cylinder locks, such as dimple and euro profile locks. This is the perfect training tool for lockpicking at home and at work. Dimple or Euro profile? - Both! This practice lock literally has two sides: One side features a Euro profile and the other a Dimple profile. Variation and versatility are the most important characteristics of this model. You can always choose the appropriate cylinder and only have to decide which profile you want to use. Even the standard pin version of this practice lock is quite a challenge and requires a lot of know-how to pick it. If you wish to increase the difficulty or make it less challenging, then you can decide for yourself the degree of difficulty at any time by means of the fastening screws. Re-pinning the practice lock is easy peasy: Simply loosen the grub screws with the provided allen key and replace the springs and pins. After that, simply screw the grub screws back in and your new challenge with your training lock is ready. The set contains the required set of pins including a pair of tweezers in the scope of delivery. In this way, you can instantly adapt your training cylinder to your own needs. This makes this exercise lock a real challenge with countless possibilities. Practice in a varied way to keep your skills improving. If you are looking for more challenges, you can order additional sets of pins in various sizes as accessories from our shop. These sets include many more key pins and driver pins as well as spool pins, security pins and springs, of course. For the best and most secure lockpicking practice, we recommend our Centurion vise. The Centurion provides a secure hold for your training cylinder and helps you to concentrate solely on picking. The cylinder in this set is slotted on one side. The other side is kept as it is in order to increase the level of difficulty. This gives you the choice of whether you want to exercise visually or without seeing anything. A training lock that offers a wide range of possibilities and will take your lockpicking skills to a new level. Without any exception, only very high quality and precise cylinder locks are used for the production. Brilliant and precise fine mechanics from Multipick - Made in Germany, Made in Bonn. Features:Complete super set with top accessories for added possibilitiesStart immediately and celebrate your first achievementsTrain like the pros - progress from novice to professionalBecome quickly successful - What you see is what you do - learn and understand!Compatible with our pinning kits available in our shop Dimensions: 30 / 10 / 30 mm When you use an electric lock pick gun with our practice locks, it is important to check the grub screws regularly because they can loosen due to the strong vibrations.  

For randomly trying and swiping haphazardlyWelcome to professional high classThe ultimate Lock Picks in worldwide unrivaled High-Tech qualityFinest blades – ingenious spring steel – perfect finishingHigh quality individual design - Perfection in every detail100% Made in Germany – By Multipick, of course We invite you to test it! Give it a try!Technical data:Pick type: RakeBlade thickness: 0.6 mmLength: 120 mmWeight: 8 gr.Material Blade: excellent quality spring steelMaterial Handle: excellent quality stainless steelOur ELITE picks are rust-free thanks to a special hardening and tempering process.