Small box with 4 tension pins for item 3130

The new generation of spring loaded round tension ringsA development with high utility value To Pick or manipulate a cylinder, the cylinder core needs to be under gentle tension to be turned. On one hand while working with an electric pick, one mainly favours the possibility of a quick change of the tension direction. On the other hand manual pickers prefer a continuous turning tension in one direction. The new and high precisely produced semi- automatic tension ring TNT-20-V3 simplifies the whole work. The tension to the left and right side can be applicate fine and gentle, thanks to its extravagant production, and enables effortless use, thanks to its handle geometry The TNT-20-V3 is the only tensioner worldwide with the possibility to adapt to various different cylinders due to the quick and tool-less but exact change of the lower tension pin. Exchange pins for straight, left-sided and right-sided curved cylinder profiles are included in delivery.  The TNT-20-V3 is absolutely recommendable for both beginner and professionals, for manual picking and picking with electric picks. Outstanding abilities and improvements compared to the preceding models:Highly precise  fine-mechanic production from Germany (not to be compared with products from Asia or USA)New handle geometry enables sensitive and effortless tension to both sides.Tool-less changing of the tension pins for straight, left-sided and right-sided curved cylinder profiles for optimal and quick adjustment to all types of cylinders. Multipick TNT-20-V3 Intelligent and precise fine-mechanic "Made in Germany" by ©Multipick 

The Flip-It - a development with high utility value Now in a revamped version for even more precise triggering and better handling For the new Flip-It we did not only concentrate on an extraordinary design, but also on the mechanical precision of the trigger system. What always disturbed us with other plug spinners on the market was that they tend to jam when trigered, which prevents the free turning of the cylinder core over the dot. This problem is principally due to a careless finish of the trigger mechanism, often coupled with cumbersome fixation of the control element. The engineers of Multipick took over this problem into consideration and found a perfect solution. The mechanism of the new Flip-It enables the “shot” release, simply through a gentle push of the trigger button. The advantage is that you can work without the exertion that was generally necessary until now. This tool enables precise and calm working. The Flip-It impresses with its highly qualitative aircraft grade aluminium (EN AW-7075) production. This product, with its combination of spring steel, proved for durability, and rubber rings of silicium, for non-slip guaranty, is an absolute highlight and an essential tool for any Lock pickerFine precision engineering "Made in Germany" by ©Multipick  

New cutting-edge design, new top features - unique! – The Centurion from MultipickNow also suitable for the North American market!The Centurion is a new, enhanced product from the ©Multipick brand and is manufactured with the latest CNC milling machines using high-quality aircraft aluminum. The Centurion is "the" next generation high-tech cylinder holder. The brilliant design combined with a high-quality surface makes the Centurion always look outstanding. The elegant and massive base of the solid milled foot provides a secure and firm footing. The small rubber studs on the base of the Centurion secures it against slipping on virtually all surfaces during picking. However, in the event of extreme “pick attacks”, the supplied table clamp can prevent the Centurion from slipping. The newly milled cylinder mount is milled perfectly to fit all Euro profile cylinders and demonstrates only minimal play. In addition, the cylinder is secured on the top by a knurled screw which completely eliminates slipping and allows you to concentrate fully on the cylinder and its opening.North American users can now also benefit from the additional mounting capability of the cylinder.Further, if you’re looking for a high-quality practice cylinder, we recommend the model sets TCS-SET and TCSS-SET respectively. The sets are manufactured by ©Multipick and are the perfect complement to the Centurion.You are welcome to let us engrave your centurion individually. Image, drawing or even names can be engraved. ©Multipick works with the most modern laser technics and can place all kinds of subject under the laser.You are welcome to contact us for more information. Colour: Aluminium (EN: AW-7075)The centurion is delivered in parts. A fitting Allen Key of 3 mm is included. Dimensions: Height: 215 mmLength of the pillar: 185 mmDiameter of the pillar: 37 mmBase (triangle): 145 x 145 x 145 mmWeight: 0.924 kg Fine precision engineering "Made in Germany" by ©Multipick  

6-sided Cutter for drilling out tubular (radial pin tumbler) locks.  

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!!