Solid Carbide High-Speed Drill 6 x 60 mm

The latest generation of solid carbide burrsThe cylindrical shape profile cylinder milling burr 6 x 80 mm from PFERD for locksmiths features a drilling tip and toothed cutting edges. This milling burr has been specifically designed for efficient and fast milling of security profile cylinders with pull protection. The built-in drill tip ensures precise alignment, which means that the profile cylinder can be milled precisely. Due to the toothing and the specially positioned grooves, optimum removal of shavings is achieved, which reduces the risk of jamming and breakage of the tool. This innovative burr also stands out due to its long lifespan. In comparison to other burrs, it enables profile cylinders to be opened much more quickly due to its high milling capacity. 

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!! 

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors. 

The auxiliary milling key is designed to address malfunctions that occur after the milling process.For cylinders with emergency and danger functions, the cam coupling is held in place by pressing the auxiliary milling key into the center of the cylinder while turning it. If the coupling becomes stuck, a light tap with a hammer can help release it.For standard cylinders, vibrations during the milling process may cause the coupling to shift forward. To resolve this, hold the keyway in a vertical position and use the auxiliary milling key to push the coupling inward, allowing the cam to rotate freely.If a key is lodged inside the cylinder, use a 1 mm pointed spring steel wire, such as our Coupling Actuator (SKU: 3138), which can be purchased separately. Press the wire against the edge of the core while simultaneously turning the auxiliary milling key to move the cam. 

Both window and door locks can be opened and re-locked as needed using this universal construction key or builder's key. The built-in measurement scale ensures precise and error-free determination of the required length for new cylinder installations.