Solid carbide milling burr for locksmiths 4 x 60 mm

The latest generation of solid carbide burrsThe cylindrical shape profile cylinder milling burr 6 x 60 mm from PFERD for locksmiths features a drilling tip and toothed cutting edges. This milling burr has been specifically designed for efficient and fast milling of security profile cylinders with pull protection. The built-in drill tip ensures precise alignment, which means that the profile cylinder can be milled precisely. Due to the toothing and the specially positioned grooves, optimum removal of shavings is achieved, which reduces the risk of jamming and breakage of the tool. This innovative burr also stands out due to its long lifespan. In comparison to other burrs, it enables profile cylinders to be opened much more quickly due to its high milling capacity. 

This solid carbide milling burr 4 x 6 x 60 mm is cut off one piece. It distinguishes itself through rough drilling features, due to its deep cuts, which also leads to a good chipping removal.Special features:Due to the reduction of a 6 mm drill burr to 4 mm at the tip, working time is reduced by more than half, for less material has to be cut. A pleasant side effect: the core drawing protection doesn’t have to be destroyed thanks to the small milling burr head diameter. Technical features:Material: Solid carbide Form: cylindrical d1: 4.0 mm I1: 14.0 mm d2: 6.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!! 

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

BLUE-TEC: The new generation of milling burrs especially for locksmiths better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs are also available with extrafine cross gearing HP-4 for harder kind of steel. Excellent control (also at difficult to reach positions):Smooth operationShort chipsGood surface finishMedium cutting action  For all kinds of steel:Up to extra hard steel ca. 70 HRCCast ironStainless steel (INOX)Heat-resistant substances, such as e.g. Nickel based + cobalt based alloys Conclusion: This fine gearing is the most suitable for extremely hard steel !!