Universal Key "long"

The door can be unlocked with the universal key after removing the cylinder. The calibration to determine the length of the cylinder is very practical. Version: metal.Art-No. 2030 Universal Key “long”Art-No. 2031 Universal Key “short”  

This special key was designed to allow fast access for the emergency services. It can be used to open barriers with safety locks and unlocking cover-caps with DIN 3222, on refuse bins with GSM locks and gates. 17mm triangular keyLength: 300mmWeight: 400gMaterial: malleable cast iron 

This ingenious and simple accessory is used after cylinder plug milling or pulling.In case the cylinder does not project, this useful tool may be fixed to the Multipick Special Lock cracker (Art.-No 20110), in order to break the cylinder lock at the fixing point. 

Special key to unlock barrier posts or similar Triangular 17 mmLength 195 mmLever thickness 5 mmWeight 286 g 

THE NEW V-PRO SELF-TAPPING EXTRACTION-SCREWS Manufactured according to the latest state-of-the-art technical expertise Very powerful!High tensile strength and breaking load, combined with a high degree of torsion Our most economical customer uses our screws repeatedly up to 6 times - what should we do about this? No pre-drilling required! (self-tapping)It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coatingOptimized thread geometry and screw length!Maximum retention force in each cylinder profileOne-handed screw-in without a ScrewFix bit adapter!Whether by hand or cordless electric screwdriver, via its patented SIT® 20-bit drive (fully downward compatible with TORX20) A great advantage of the SIT 20 drive is that the screw can be driven in with one hand and without a screw adapter. Those who have ever had to thread in screws of other manufacturers will love this advantage! Having a high speed on the drill and applying pressure on the screw is advantageous for easy threading of the V-PRO extraction screw! DELTA SEAL® High-tech color anti-friction coating!The anti-friction coating supports easy screw-in actionAn individual colour scheme for each screw sizeCorrosion protection Important! Experience has shown that a lubricant is often used to assist in threading the screw. This is not necessary with V-PRO extraction screws and in fact is counterproductive.Our screw has an anti-friction coating that does not require a lubricant. If additional lubrication is used, it can lead to the shavings becoming clumped which can no longer be eliminated. V-PRO screws have an impression stamped into the screw-head! Latest technology — Made in Germany!We guarantee the highest qualityDepending on the ordered quantity, the screws will be sent either in boxes or sachets. In this packaging unit we include a SIT20 quality bit. 

  

This lock cracker breaks even cylinders only slightly projecting thanks to a powerful clamp which is acting from underneath. With this tool you may facilitate the cylinder cracking by inserting a special pulling screw into the cylinder which prevents the lock cracker from slipping off. You remove the tool head from the shaft, place and fix it on the cylinder. Then you screw a suitable special pulling screw into the cylinder, using a Torx 20 bit, 50 or 70 mm long (Article: 2128 + 2129).