Bump Key AZBE euro profile cylinder

Our wave rakes represent years of research and development. Based on various wave rakes which are commercially available, and in combination with initial mathematical modelling and final analysis on several prototypes, we created these impeccably crafted wave rakes. Like all lock picks from Multipick, they are made of the finest spring steel, in unrivaled high-tech quality in 0.6 mm-thickness. The waves of the rakes have a length of 25.4 mm in order to eliminate the normally required precise insertion depth and to facilitate simultaneous interaction with 7-pins. The wave rakes are equally tapered from the shaft to tip in order to maximize strength and to eliminate stress concentrations that cause lesser picks to snap. The long plow tip lifts pin 1 instead of bumping into it head on. With a good technique, prompt openings are often possible.Our new wave rake profiles are based on Christina Palmer's original (2019) quint cycloid and quint sinusoidal waves, which were designed by her and a group of PhDs. To achieve this, advanced Mathematica software was used to create an exact tapered wave effect. Christina Palmer is known for her great passion for locksport. She combines her personal experience with the laws of physics, applying both to the development of these two sophisticated profiles. We would like to thank Ms. Palmer for endowing us with her wave rake and tension wrench designs.    Digression:Cycloid curves characterise the wave forms as they can be precisely defined and drawn using parametric equations in CAD programs and have characteristics that lead to useful wave rakes. For example, cycloids are the curves created by the spirograph drawing tool, and also represent the curve of the fastest descent under constant gravity. Many cycloid wave forms were tested to determine the optimal parameters. Most commercially available wave rakes have sharp tips and steep slopes that make smooth raking challenging and also damage the pins. Our short cycloid wave rakes with a sine/cosine ratio of 0.25 provide non-slip action, making it ideal for simple basic locks. Our sinusoidal wave rakes with a sine/cosine ratio of 0 offer gentle action, ideal for hard locks. Both wave forms are available in a quad version for large locks and a quint version for small locks.While the long cycloid wave rakes are recommended for normal use, and the long sinusoidal wave rakes for gentle use. Short cycloid wave rakes are intended for fine raking.Caution! The aggressive cycloid wave rakes are sharp like a saw and can damage the pins and the entire lock. 

Cobalt HSS CO 8% DIN 338 HD DrillsProfessional HD (Heavy Duty) special drill for highest requirements. Bit angle 135°, croß cut C shape. tolerance h8. Particularly solid drill made off high-alloyed HSS-Co (8%, 10% Mo) with distinct thermo-set resistance. For drilling of wear-resistant sheet metals, steel and bronze up to 1400 N/mm2, of hard and high-strength alloys on CrNi-base and acid and heat proof steels.Total Length: 61 mm Price per piece. 

The extreme flexibility and elasticity of the hammer handle allows the bump key to “jump” back out of the keyway immediately after being hit. This effect is very positive in the technique of bumping and we therefore recommend this hammer for beginners and people using common bumping technique.Weight : 74 g Length: 210 mm 

The Lishi KW1-AG-5 Pins Original Tool is a precision-engineered 2-in-1 tool designed for non-destructive cylinder opening and decoding of locks featuring the Kwikset KW1 key profile. This profile is widely used throughout the U.S. residential market and operates with five pin tumblers without an additional sidebar. All manipulation is performed via the conventional pin stack arrangement.The tool combines the proven Lishi mechanism with a clearly readable scale, allowing accurate probing and precise positioning of each individual pin. Direct tactile feedback enables reliable assessment of the cylinder’s internal condition and supports controlled, methodical work without the need for additional tools.The AG version stands for Anti-Glare. Its matte, non-reflective surface minimizes light reflections and significantly improves readability of the depth markings, particularly in bright ambient lighting. Manufactured from durable stainless steel, the tool remains dimensionally stable and reliable even under frequent professional use.The Lishi KW1-AG-5 Pins Original Tool is intended for skilled users who regularly work with standard residential cylinders in the North American market and prefer a structured, traceable working method directly at the cylinder.Tool for professional users.