Disc Setter-T10

Double-sided tension wrench Specifications:Side 1 length (outer) = 7.1 mm / Width = 2.3 mmSide 2 length (outer) = 13.5 mm / Width = 3.0 mmMaterial thickness = 0,8 mmTotal length = 75.2 mmWidth: 3.0 mm 

The single dimple pick Flat Flag was developed exclusively for Multipick in collaboration with the well-known lockpicker Lock Noob. The tool is based on a unidirectional flat flag profile – one of the most versatile designs for manipulating dimple locks.The key feature lies in its alignment: the flag is perfectly in line with the shaft, resulting in an especially slim profile – ideal for tight tolerances and complex dimple locks.This geometry allows pins to be manipulated from both sides without losing torque control. This is a decisive advantage, particularly with high-security dimple locks that have multiple pin rows – such as top/bottom or side-by-side arrangements.Thanks to its dual-sided usability, the Flat Flag is suitable for left or right-hand operation, reducing the constant need to switch between different picks.The zero position remains visible at all times, making it easier to locate the next pin position. The specially surface-treated handles are also more scratch-resistant and durable. This handle design was developed in close cooperation with Lock Noob, with a clear focus on functionality and real-world usability.High versatility, precise control even in narrow keyways, and optimal handling in complex locking systems – these are the strengths of this pick. Specifications:Flag length: 2.0 mmFlag width: 2.5 mmFlag offset: 0.00 mmFlag orientation: left, rightBlade shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmTotal length: 130 mmWeight: 11 g 

Double-sided tension wrench Specifications:Side 1 length (outer) = 7.6 mm / Width = 2.3 mmSide 2 length (outer) = 14.0 mm / Width = 3.0 mmMaterial thickness = 1.3 mmTotal length = 76.2 mmWidth: 3.0 mm 

Double-sided tension wrench Specifications:Side 1 length (outer) = 7.3 mm / Width = 2.3 mmSide 2 length (outer) = 13.7 mm / Width = 3.0 mmMaterial thickness = 1.0 mmTotal length = 75.7 mmWidth: 3.0 mm 

The so called tensioner is one of two components that is used with disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway.