Double-bit decoder for SAB 6x6

Tubular Picks for the picking of tubular locks are high-precision tools made in the US. This type of lock is commonly used in: Alarm systems - Computer-Locks - Car Wheel/Pedal Locks - Fruit Machines - Bicycle Locks - Soda Machines etc. The special characteristic of Tubular Picks is, that really everybody can handle the tool and pick (lock and unlock) tubular locks without causing any damage, within seconds. Very little practice is needed. At the same time the lock code is decoded and using the included depth-chart it is easy to read out the code and, thus, produce a duplicate key. Tubular Picks Article-No. 32560 come with an extensive and illustrated manual. Delivery includes a high-quality leather case.New model for 7-pin tubular locks with smaller diameter. The reset-button allows for quick adjustment. 

Bump Key ELCA (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Bump Key (piece) CES new We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!  

Manual TOPOLINO Decoder for IFAM M This Topolino Decoder is constructed with a specific structure for the IFAM M cylinder lock and consists of a blade with six uniquely positioned decoder pins. By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key. Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected. 

Bump Key CVL 2 (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Bump Key EVVA3 (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!   

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Potent 7x7, its construction is accordingly. The pick consists of a rod with 7x7 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Potent 7x7 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool.