Positioning Ring for Disc Tumbler Locks
Disc Setter
Scale
In stock
Tensioner MOS-SPT10 for disc setter T10
The so called tensioner is one of two components that is used with disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway.
SKU#: MOS-SPT10
Available ex stock
- Delivered within 1-9 days, depending on shipping method and country of delivery
Available ex stock
In stock
Disc Setter-T2
The so called disc setter with tensioner is used for disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway.
SKU#: MOS-SST2
Available ex stock
- Delivered within 1-9 days, depending on shipping method and country of delivery
Available ex stock
In stock
Tensioner MOS-SPT2 for disc detainer locks
The so called tensioner is one of two components that is used with disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway.
SKU#: MOS-SPT2
Available ex stock
- Delivered within 1-9 days, depending on shipping method and country of delivery
Available ex stock
In stock
Positioning Ring for Disc Tumbler Locks
Basically, one or two positioning rings are included in a set. Depending on the type of set purchased, it will contain a positioning ring for dimple locks and/or a positioning ring for disc tumbler-/detainer locks. The rings give you a reference point in which area you are with the corresponding opening tool (pick or disc setter) and by means of the attached scales, you have a good orientation. This is a positioning ring for disc tumbler-/detainer locks.
SKU#: MOS-PR001
Available ex stock
- Delivered within 1-9 days, depending on shipping method and country of delivery
Available ex stock
In stock
Disc Setter-T10
The so called disc setter with tensioner is used for disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. More models are being planned.
SKU#: MOS-SST10
Available ex stock
- Delivered within 1-9 days, depending on shipping method and country of delivery
Available ex stock
In stock
Scale SO-2.0 for Disc Detainer Locks - Opener
These scales are used for unlocking disc tumbler-/disc detainer locks. They are available in different graduations. Also here, the selection of a scale depends on the type of lock you want to open. This scale corresponds to the graduation 2.0mm .
SKU#: MOS-SK002
Available ex stock
- Delivered within 1-9 days, depending on shipping method and country of delivery
Available ex stock
In stock
Scale SO-1.6 for Disc Detainer Locks - Opener
These scales are used for unlocking disc tumbler-/disc detainer locks. They are available in different graduations. Also here, the selection of a scale depends on the type of lock you want to open. This scale corresponds to the graduation 1.6mm .
SKU#: MOS-SK001
Available ex stock
- Delivered within 1-9 days, depending on shipping method and country of delivery
Available ex stock
