30/30 Emergency and Practice / Exercise Lock - 10 pcs

Opening-Set for single- and double-offset doorsEvery locksmith knows the problem of closed double-offset doors. The new ACE spiral needles, made of high quality spring steel, allow the non-destructive opening of double-offset doors in most cases. The use is very simple: The tool is inserted in the narrow gap between door and frame by turning until it makes contact with the latch. Continued turning pushes back the latch. Usually this process does not cause any damages except a pierced sealing strip. The set consists of four (4) different tools for doors with the lock mounted either on the right or on the left and 2 different material strengths (1.5 and 1.7 mm) for the different types of offset door designs. Of course, the ACE-tools are very well suited for opening simple offset doors as well!For very tightly engaging (closing) double and simple offset doors the ACE-Mini-Set (2 pieces) of only 1.25 mm needle-strength is especially suited. 

This 9-piece set covers a wide range of typical door-opening requirements and provides practical, straightforward solutions for everyday locksmith use. The differently bent latch wires with a diameter of 1.6 mm meaningfully expand existing tool kits and complement standard equipment with versatile application options. The set includes wire needles for double-rebate doors, window rebate geometries, and standard doors, as well as dedicated versions for fire-rated doors, aluminum doors, uPVC doors, and combined uPVC/metal doors. The set is further complemented by a single-rebate wire needle for outward-opening panic doors and a spring wire suitable for working on cylinder clutches as well as for dismantling BKS round cylinders. The spring wire, designed for cylinder clutch work and the removal of BKS round cylinders, features a particularly slim diameter of just 1.4 mm, allowing precise operation even in very confined spaces.  

The popular panic door opener is now available as a set for door opening right and left. No difficult operation anymore thanks to the coverage of all opening directions. Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities! Extending the door gap can accomplished e.g. with a strong siphon, door wedges or a door lever.Special:Spring steel blade, only 1mm thick. Also available individually33800 = Door use from the top right33805 = Door use from the top left  

New cutting-edge design, new top features - unique! – The Centurion from MultipickNow also suitable for the North American market!The Centurion is a new, enhanced product from the ©Multipick brand and is manufactured with the latest CNC milling machines using high-quality aircraft aluminum. The Centurion is "the" next generation high-tech cylinder holder. The brilliant design combined with a high-quality surface makes the Centurion always look outstanding. The elegant and massive base of the solid milled foot provides a secure and firm footing. The small rubber studs on the base of the Centurion secures it against slipping on virtually all surfaces during picking. However, in the event of extreme “pick attacks”, the supplied table clamp can prevent the Centurion from slipping. The newly milled cylinder mount is milled perfectly to fit all Euro profile cylinders and demonstrates only minimal play. In addition, the cylinder is secured on the top by a knurled screw which completely eliminates slipping and allows you to concentrate fully on the cylinder and its opening.North American users can now also benefit from the additional mounting capability of the cylinder.Further, if you’re looking for a high-quality practice cylinder, we recommend the model sets TCS-SET and TCSS-SET respectively. The sets are manufactured by ©Multipick and are the perfect complement to the Centurion.You are welcome to let us engrave your centurion individually. Image, drawing or even names can be engraved. ©Multipick works with the most modern laser technics and can place all kinds of subject under the laser.You are welcome to contact us for more information. Colour: Aluminium (EN: AW-7075)The centurion is delivered in parts. A fitting Allen Key of 3 mm is included. Dimensions: Height: 215 mmLength of the pillar: 185 mmDiameter of the pillar: 37 mmBase (triangle): 145 x 145 x 145 mmWeight: 0.924 kg Fine precision engineering "Made in Germany" by ©Multipick  

In this unique, 39-piece lock pick set, ambitious lock pickers will find a selection of the picks appreciated most by "Lock Noob" and which he uses on a daily basis. Besides the Abona and Monith rakes designed by "Lock Noob" himself, these are comprised of, without exception, 19 selected Multipick ELITE picks plus two ELITE dimple lock picks. 16 different Multipick ELITE tensioners, including 3 TOK tensioners, and 3 champion tensioners Chr. Holler and 3 dimple lock tensioners round off this rich, high-yield, high-quality set. Quality features:The ultimate lock-pick set in worldwide unrivalled high-tech quality.Finest pick tips - ingenious spring steel - perfect workmanshipHigh-quality individual design - perfection down to the last detailNo duplicate picks or tensioners100% Made in Germany - by Multipick, of courseThis elegant set is housed in a fold-out genuine leather case. - A "must have" for every "Lock Noob" fan! -