30/30 Emergency and Practice / Exercise Lock - 20 pcs

The unbeatable Electric Lock Pick Set from Multipick!Outstanding quality from Germany!We are now also offering the popular Multipick Kronos EPG as a complete set with a large assortment of useful auxiliary tools. A hard-shell plastic case with appropriate recesses provides for secure storage; there is an additional small hinged plastic box for bits and pieces.The Kronos provides you with the most modern electronics coupled with a high-performance motor. Because of its low inherent vibrations, the Kronos is one of the most quiet (if not the most quiet) electric lock picks offered anywhere in the world. A genuine plus if you still have to be picking a cylinder lock in the early hours of the morning. Further we were able to convince one of the largest German manufacturers of DC motors to collaborate with us. Thanks to its newly designed power management system, the Kronos EPG is able to operate under steady load for more than two hours.Charging has never been so easy! Simply connect the accompanying USB cable via the included mains adapter or to a computer and recharge the Kronos without the tangle of various different cables. One single cable with many possibilities — that’s how we do it nowadays! An additional rechargeable battery delivers the needed “power” when the situation demands it. What’s more, the accompanying pick needles are manufactured out of exactly the same ingenious material as our ELITE lock picks.Important and useful accessories that one otherwise would have to buy separately, are also provided in this complete kit.So, to name just a few, there is the Circular Tensioner TNT-20-V3 for a quick change in the direction of tension. The TNT-20-V3 is the only circular tensioner anywhere in the world that offers the possibility of adapting precisely through a quick and tool-less change of the lower tension pin to different respectively curved cylinder profiles. Change pins for straight, left- and right-sided curved cylinder profiles are included as part of the delivered content.The Flip-It (Multipick-Original) - a further development with an extremely high utility value. With the new Flip-It, particular value was placed not just on its unusual design, but also on the mechanical precision of the “trigger system”. The mechanism in the new Flip-It makes it possible to “shot release” by just applying “light pressure” on the trigger button. The advantage this mechanism provides is that; one can work without the “exertion” that was generally necessary until now. This spinner thereby makes it possible to work very calmly and precisely.In addition to the standard ELITE pick needles (0.5 mm), a five piece needle set in 0.6 mm thickness is also provided. This thicker version is more forgiving of beginner mistakes by not breaking so quickly.Just take a look at everything that comes with this set — there are no more useful accessories than these!Nor would you expect anything less in this Kronos Complete Product Kit  “made in Germany” by Multipick. Technical specifications - Kronos:Li-Ion battery 3.7 V / 2900 mAhNeedle deflection precisely adjustable from 1 to 4 mm at the needle chuckIdle speed 13,000 rev/minWeight with battery - approx. 0.350kgDimensions: D=34 mm L=205 mmBattery life in continuous operation: approx. 2.5 hours 

This professional vehicle opening set is specifically designed for demanding applications, enabling quick, efficient, and most importantly, damage-free entry from the outside. Ideal for locksmiths, roadside assistance, and emergency responders who require a wide range of specialized tools.The three-piece long reach tool (screw-threaded) extends up to 180 cm, making it perfect for tasks that require an extra-long reach. The set is complemented by a square hook with a single-bend end and a round hook with a double-bend end, allowing precise work in hard-to-reach areas.Flexible tools include a robust Slim Jim, made of strong flexible spring steel, as well as two loop reach tools with traction spheres - one in a standard version and another in a highly flexible variant for particularly tight spaces. The interior grabber and the two-piece precision interior grabber provide additional reach and excellent control during use.The 90° interior grabber with a square hook and flexible middle section is ideal for complex mechanisms requiring great dexterity. Two ultra-flexible, extremely thin hook wires complete the set, allowing precise work even in the smallest gaps. To facilitate access to the vehicle interior, the set includes two plastic wedges and an extra-thin nylon air cushion for narrow gaps. 

The exercise cylinder from Multipick - now with 6-pin chambers and plenty of possibilities. Thanks to its modular structure and side slots, our training cylinder is perfect for teaching yourself how to pick challenging locks and for taking your skills to the next level. Our classic practice cylinder is now available in a 6-pin version that offers you even more training options. The special highlight of this Euro profile practice lock is its left-sided cutaway, which is adapted to the mounting position of cylinder locks on American and Canadian doors, allowing users to authentically experience and learn how to pick locks in the inverted position.  Moreover, the left-slotted practice locks provide a new challenge for lockpickers. Besides, due to the wide variety of our practice locks, regardless of being right- or left-slotted, they also optimally support the practice needs of right- and left-handers alike. Even the standard pin version of this practice lock is quite a challenge and requires a lot of know-how to pick it. If you wish to increase the difficulty or make it less challenging, then you can decide for yourself the degree of difficulty at any time by means of the fastening screws. Re-pinning the practice lock is easy peasy: Simply loosen the grub screws with the provided allen key and replace the springs and pins. After that, simply screw the grub screws back in and your new challenge with your training lock is ready. The set contains the required set of pins including a pair of tweezers in the scope of delivery. In this way, you can instantly adapt your training cylinder to your own needs. This makes this exercise lock a real challenge with countless possibilities. Always adapt your training to further improve your skills. If you are looking for more challenges, you can order additional sets of pins in various sizes as accessories from our shop. These sets include many more key pins and driver pins as well as spool pins, security pins and springs, of course. For the best and most secure lockpicking practice, we recommend our Centurion vise. The Centurion provides a secure hold for your training cylinder and helps you to concentrate solely on picking. The cylinder in this set is slotted on one side. The other side is kept as it is in order to increase the level of difficulty. This gives you the choice of whether you want to exercise visually or without seeing anything. A training lock that offers a wide range of possibilities and will take your lockpicking skills to a new level. Without any exception, only very high quality and precise cylinder locks are used for the production. Brilliant and precise fine mechanics from Multipick - Made in Germany, Made in Bonn. Features:- Train like a pro and progress from novice to a professional- Complete 6-pin set with accessories for yet more possibilities- Learn and understand more through the half-open design of the Europrofile training locks- Compatible with our pinning kits available in our shop Dimensions: 30 / 10 / 30 mm When you use an electric lock pick gun with our practice locks, it is important to check the grub screws regularly because they can loosen due to the strong vibrations.  

THE NEW V-PRO SELF-TAPPING EXTRACTION-SCREWS Manufactured according to the latest state-of-the-art technical expertise Very powerful!High tensile strength and breaking load, combined with a high degree of torsion Our most economical customer uses our screws repeatedly up to 6 times - what should we do about this? No pre-drilling required! (self-tapping)It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coatingOptimized thread geometry and screw length!Maximum retention force in each cylinder profileOne-handed screw-in without a ScrewFix bit adapter!Whether by hand or cordless electric screwdriver, via its patented SIT® 20-bit drive (fully downward compatible with TORX20) A great advantage of the SIT 20 drive is that the screw can be driven in with one hand and without a screw adapter. Those who have ever had to thread in screws of other manufacturers will love this advantage! Having a high speed on the drill and applying pressure on the screw is advantageous for easy threading of the V-PRO extraction screw! DELTA SEAL® High-tech color anti-friction coating!The anti-friction coating supports easy screw-in actionAn individual colour scheme for each screw sizeCorrosion protection Important! Experience has shown that a lubricant is often used to assist in threading the screw. This is not necessary with V-PRO extraction screws and in fact is counterproductive.Our screw has an anti-friction coating that does not require a lubricant. If additional lubrication is used, it can lead to the shavings becoming clumped which can no longer be eliminated. V-PRO screws have an impression stamped into the screw-head! Latest technology — Made in Germany!We guarantee the highest qualityDepending on the ordered quantity, the screws will be sent either in boxes or sachets. In this packaging unit we include a SIT20 quality bit. 

The exercise cylinder from Multipick - now with 6-pin chambers and plenty of possibilities. Thanks to its modular structure and side slots, our training cylinder is perfect for teaching yourself how to pick challenging locks and for taking your skills to the next level. Our classic practice cylinder is now available in a 6-pin version that offers you even more training options. Even the standard pin version of this practice lock is quite a challenge and requires a lot of know-how to pick it. If you wish to increase the difficulty or make it less challenging, then you can decide for yourself the degree of difficulty at any time by means of the fastening screws. Re-pinning the practice lock is easy peasy: Simply loosen the grub screws with the provided allen key and replace the springs and pins. After that, simply screw the grub screws back in and your new challenge with your training lock is ready. The set contains the required set of pins including a pair of tweezers in the scope of delivery. In this way, you can instantly adapt your training cylinder to your own needs. This makes this exercise lock a real challenge with countless possibilities. Always adapt your training to further improve your skills.  The cylinder in this set is slotted on one side. The other side is kept as it is in order to increase the level of difficulty. This gives you the choice of whether you want to exercise visually or without seeing anything. A training lock that offers a wide range of possibilities and will take your lockpicking skills to a new level. Without any exception, only very high quality and precise cylinder locks are used for the production. Brilliant and precise fine mechanics from Multipick - Made in Germany, Made in Bonn. Features:- Train like a pro and progress from novice to a professional- Complete 6-pin set with accessories for yet more possibilities- Learn and understand more through the half-open design of the Europrofile training locks- Compatible with our pinning kits available in our shop Dimensions: 30 / 10 / 30 mm When you use an electric lock pick gun with our practice locks, it is important to check the grub screws regularly because they can loosen due to the strong vibrations.