Allen Key 0.9 mm (Spare)

The ELITE G-PRO are the ultimate dimple lock picks, designed  for the professional lock picker.The highest-quality manufacturing and the finest materials allow unprecedented feedback when picking.The ELITE G-PRO is distinguished by its outstanding quality:finest polished tips in many variations for the widest variety of locksmaximum feedback - maximum transfer of pin behaviour to the userextremely stable, yet light and easy to handle, just like a springmicroelliptic blade shanks in various diameters for the perfect turning pointnon-slip, fatigue-free and lightweight handles made of the finest rubberized aluminiumexchangeable and individually available tips to safeguard the investment100% made in Germany.Specifications:Flag length: 2.30mmFlag width: 1.80mmFlag outreach: 0.50mmFlag orientation: rightShank radius - Ø: 0.85mmShank length: 95.0mmShank diameter: 8.0mmTotal length: 130.0mmWeight: 11g  

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 1.60mmFlag outreach: 0.00mmFlag orientation: rightShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 1.60mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mm 

The kit for quick deployment! We have focused on the essentials and offer in this handy kit only the tools that a locksmith, and also a janitor, urgently needs for pulling the core as well as to snap off a cylinder from the bridge where the retaining screw is located.The tension rod is equipped with a hardened trapezoidal thread that enables precise operation and improved load bearing. Compared to the conventional fine thread, this new thread is more durable and allows faster and more precise operation without losing any torque due to the greater thread pitch. Furthermore, the rougher trapezoidal thread is less susceptible to brass shavings. If you should ever need spare parts, just give us a call! We constantly have all spare parts in stock.On top of the bell lock puller with all the necessary working tools, you also get 50 V-PRO pull screws with diameters of 4.2 - 4.8 and 5.5 mm and a G100 profile cylinder 30 / 30 for restoring the closing mechanism of the affected door.Also included is a universal magnetic bit holder for easier threading of the screw with a cordless drill.In our video library we offer you 3 different video tutorials as a free bonus to our online full versions. Just scan one of the QR codes on the leaflet inside the case.Care instructions for Multipick Bell (Please pay attention to these instructions!) Just like any other tool, our lock puller "Multipick Bell" also requires care. This means that the ball bearing and the tension rod as well as all moving parts should be kept free of metal shavings after each use and regularly treated with lubricating grease. You can either apply it by means of a brush or, alternatively, using a similar spray grease. 

For safe and fast Emergency Door Openings Compared with our module 1 „Pulling“, we have assembled our module 2 „Breaking“ with our approved Power Pull Cracker for profile cylinder breaking and the necessary accessories. Cylinder breaking /cracking may be easier by using a special pull screw which avoid slipping off the cylinder lock. Notice: The colored borders of the transparent module bags lid may vary.