Other tools + useful items

The HOT SHOT Kit Prime-Cut has been revamped by BROCO.The manufacturer has added a spacious, higher quality carrying case that holds additional gear such as a regulator, clothing and everything else needed to get the job done. The welding gloves were also upgraded and the glasses were replaced with a protective mask. The central unit of the BROCO HOT SHOT kit Prime-Cut consists of the handle for the lances, which holds the burning rods with special collets and the integrated oxygen valve to regulate oxygen supply towards the end of the lances. The 3 meter long oxygen pipe, which is connected to the handle, is to be connected to a conventional oxygen pressure regulator. We screw the set together fitting to the European standards.(Pressure regulator and oxygen bottle are not included in the set)Functioning:The following articles and accessories are required to work with Hot-Shot thermic lances:Art-No 60300 - Hot-Shot KitBattery with min. 12 volt and 10 Ah. A battery for motorbikes with these characteristics is sufficient.Oxygen bottle (the size depends on the quantity of material you want to cut and existing means of transport /space.Pressure regulator for oxygenAppropriate quantity of thermic cutting rods for the planned application Connect the pressure regulator to the oxygen bottle and the end of the oxygen hose to the exit of the pressure reducer. The clamps of the strike plate and the handle of the tool are connected to the battery according to the colour code (red to +, blue to -). Select the appropriate cutting rod and collet depending on the object you want to cut. Unscrew the nut of the handle in order to place the collet then tighten the nut slightly. Now place the thermic rod in the collet (the hollow end of the rod must be placed in the collet/handle) and tighten the nut completely. Now open the valve of the oxygen bottle and adjust the level of oxygen pressure using the pressure reducer. Now touch the strike plate with the tip of the thermic rod in order to create short circuit sparks. Push the mechanism of the handle, in order to let the oxygen flow through the cutting rod and thus igniting the rod. It is possible to adjust the oxygen pressure again in order to start cutting. The higher the oxygen pressure /throughput, the higher the temperature at the tip of the rod. While higher temperature allows faster cutting it will also result in a faster burning of the thermic rod. In order to cut, place the tip of of the rod directly on the surface of the object you want to cut.  When selecting the thermic cutting rods to be used keep in mind that the diameter of the rod and the length of the rod, in combination with the oxygen pressure used, influence the speed of the cut. The oxygen pressure that is optimal depends on the material that is to be cut. The producer recommends the following approximate oxygen pressures for different types of metals: 0.6 - 1.4 bar for the punc  turing hard metal plates1.5 - 3.0 bar for the cutting of steel plates up to 0.7 mm thickness3.0 - 3.5 bar for the cutting of steel plates up to 15 mm thickness3.5 - 4.2 for the cutting of steel plates from 15 mm to 50 mm thickness4.2 - 5.5 for the cutting of steel plates over 50 mm thickness Unfortunately the producer does not give recommendations for the cutting of concrete, bullet proof glass or other materials. Users can quickly find out the optimal oxygen pressure through some short testing, though. 

We have put together an unbeatable milling set for you! M4 Multipick's milling bag - A complete set for milling cylinders, but not just for fire brigades! Small, practical and safely packed - always ready to go! Technical data:Idle speed: 26.000 min-1Collet chuck: 6 mmApplication tool max.: 36 mmBattery voltage: 18 VDimensions (L x W x H) mm: 402 x 82 x 118Battery voltage: 18 VWeight: 2.0 kg 

Brushless, three-mode rotary hammer with quick-change chuck An efficient, powerful rotary hammer with an anti-vibration handle and quick-change chuck that accepts SDS-PLUS bits. Suitable for impact and unstressed drilling, plus chipping. Speed range of 0 – 950 min-1. Impact energy of 2.0 J and max. drilling capacity of 24 mm in concrete. Features • Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in high production applications• Quickly attaches to Makita's DX02 dust extraction system for dustless drilling applications in sensitive work environments (DX02 sold separately) • Torque limiter stops bit rotation if bit jams for increased operator safety and enhanced tool protection• Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact• 40 angle bit positions enable chisels to be positioned at optimum angle of operation• Plastic housing bumper protects mode selector switch and gear housing from damage• One touch sliding chuck enables quick and easy bit changes• Ergonomic soft rubber grip design for vibration absorption and comfortable operation Technical specifications • Nominal Battery Voltage: 18 V• Voltage: LXT• Brushless Motor• Impact Energy: 2.0 J• Optimum Drilling Diameter Range in Concrete: 6 - 12 mm• Max. Drilling Diameter in Concrete: 24 mm• Max. Drilling Diameter in Wood: 27 mm• Max. Drilling Diameter in Steel: 13 mm• Impacts per Minute (IPM): 0 - 4700 min⁻¹• No load speed: 0 - 950 min⁻¹• Sound Power Level (LWA): 100 dB(A)• Sound Pressure Level (LpA): 89 dB(A)• Noise Uncertainty (K Factor): 3 dB(A)• Vibration Level, Chiselling: 11.2 m/s²• Product Dimensions (L x W x H): 353 x 85 x 213 mm• Vibration Level, Hammer Drilling Into Concrete: 15.8 m/s²• Drilling diameter with TCT core bit: 54 mm• Adapted for SDS-PLUS bits• Tool weight with battery: 3.4 - 4.,9 kg• Vibration Uncertainty (K Factor), Hammer Drilling Into Concrete: 1.5 m/s²• Vibration Uncertainty (K Factor), Chiselling: 1.5 m/s²• Battery Chemistry (Ni-Cd / Ni-MH / Li-ion): Li-ion• Electronic brake 

High Performance and efficiency brushless 5" angle grinder with variable speed for heavy-duty grinding applications Very compact cordless angle grinder with 18 V drive and a disc diameter of max. 125 mm for demanding, professional applications. Equipped with AFT and ADT. The speed is electronically adjustable. With restart protection. Features • Automatic torque Drive Technology (ADT) adjusts the torque and speed according to the load condition, enabling rapid movement between high speed and high torque applications• eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions• Active Feedback sensing Technology (AFT) automatically shuts down the tool if there is a sudden drop in rotation speed (e.g. kick-back)• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications• Anti-restart feature prevents accidental start up of tool during battery changing when switch is locked in the on position• Soft start feature gradually increases speed to eliminate start up shock• Variable speed dial enables operator to adjust wheel speed based on materials or application• Electronic current limiter protects motor from accidental overload• Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life, and overall battery life• Integrated dust screens act as additional protection against dust, dirt and debris• Ergonomic soft rubber grip design for vibration absorption and comfortable operation Technical specifications • Battery capacity 18 V • Battery system LXT • Battery type Li-ion • Brushless motor • Max. power output 660 W • No load speed: 3000 - 8500 min-¹ • Spindle thread M14 • Abore 22.23 mm • Max. disc Ø 125 mm • Restart protection • Vibration levels, surface grinding ≤ 2.5 m/s² • Vibration uncertainty factor (K value), surface grinding 1.5 m/s² • Vibration levels, surface grinding (roughing) 6.5 m/s² • Vibration uncertainty factor (K value), surface grinding (roughing) 1.5 m/s² • Product dimensions (L x W x H) 382 x 140 x 145 mm • Weight incl. battery 2.3 - 3.0 kg • Max. cutting depth 29 mm 

An all-round bundle at an unbeatable price!With this complete Makita Die Grinder set, you can get to work straight away. The two rechargeable batteries provide ample power and can be charged interchangeably with the charger.Features: • Spindle housing made of die-cast aluminium with 35 mm Ø collar • Euro collet 43 mm Ø • Particularly slim housing, easy to grip • Additional 3 mm and 8 mm collets available as accessories • Slide switch for convenient one-handed operation • Anti-restart feature with warning light prevents the machine from starting when the battery is inserted and switches on when the capacity is insufficient • Supplied in a cardboard boxTechnical Data: • Operating mode: Battery operated • Battery power: 18Volt • Collet chuck: 6 mm • No-load speed: 26,000 min-1 • Weight: 2.0 kgThe scope of delivery includes: • 2 Makita BL1850B, 197280-8 18V / 5.0Ah rechargeable batteries, sliding battery with LED charging indicator • 1 Charger Makita DC18RC, 195584 for 14.4 - 18.0V sliding batteries 

A powerful, brushless general-use drill for screwdriving and drilling A powerful brushless tool with two speeds for screwdriving and drilling for professional use. Max. torque of 50 / 25 Nm. A versatile tool for fitters, builders and maintenance staff. Integrated LED light. Features • eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications• Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life• 21 clutch settings deliver up to 440 in. lbs. of torque• All metal gears and gear housing for more efficient power transmission• Ultra-compact design (only 6-5/8" long)• Dual LED job lights with preglow and afterglow features• Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold Technical specifications • Nominal Battery Voltage: 18 V• Voltage: LXT• Brushless Motor• No load speed: 0 - 500 / 0 - 1900 min⁻¹• Max. fastening torque: Hard/Soft 50 / 27 Nm• Torque setting: 21• Max. Drilling Diameter in Wood: 38 mm• Max. Drilling Diameter in Steel: 13 mm• Driving Shank: 1/2"-20UNF "• Drill Chuck Capacity: 1,5 - 13 mm• Sound Pressure Level: (LpA) 74 dB(A)• Noise Uncertainty (K Factor): 3 dB(A)• Tool weight with battery: 1,4 - 1,7 kg• Product Dimensions: (L x W x H): 169 x 79 x 255 mm• Vibration Level, Drilling into metal: ≤ 2,5 m/s²• Vibration Uncertainty (K Factor), Drilling into metal: 1,5 m/s²• Drilling Capacity Wood (Auger Bit): 38 mm• Drilling Capacity Wood (Self-feed bit): 76 mm  

Brushless, three-mode rotary hammer with quick-change chuck An efficient, powerful rotary hammer with an anti-vibration handle and quick-change chuck that accepts SDS-PLUS bits. Suitable for impact and unstressed drilling, plus chipping. Speed range of 0 – 950 min-1. Impact energy of 2.0 J and max. drilling capacity of 24 mm in concrete. Features • Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in high production applications• Quickly attaches to Makita's DX02 dust extraction system for dustless drilling applications in sensitive work environments (DX02 sold separately) • Torque limiter stops bit rotation if bit jams for increased operator safety and enhanced tool protection• Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact• 40 angle bit positions enable chisels to be positioned at optimum angle of operation• Plastic housing bumper protects mode selector switch and gear housing from damage• One touch sliding chuck enables quick and easy bit changes• Ergonomic soft rubber grip design for vibration absorption and comfortable operation Technical specifications • Nominal Battery Voltage: 18 V• Voltage: LXT• Brushless Motor• Impact Energy: 2.0 J• Optimum Drilling Diameter Range in Concrete: 6 - 12 mm• Max. Drilling Diameter in Concrete: 24 mm• Max. Drilling Diameter in Wood: 27 mm• Max. Drilling Diameter in Steel: 13 mm• Impacts per Minute (IPM): 0 - 4700 min⁻¹• No load speed: 0 - 950 min⁻¹• Sound Power Level (LWA): 100 dB(A)• Sound Pressure Level (LpA): 89 dB(A)• Noise Uncertainty (K Factor): 3 dB(A)• Vibration Level, Chiselling: 11.2 m/s²• Product Dimensions (L x W x H): 353 x 85 x 213 mm• Vibration Level, Hammer Drilling Into Concrete: 15.8 m/s²• Drilling diameter with TCT core bit: 54 mm• Adapted for SDS-PLUS bits• Tool weight with battery: 3.4 - 4.,9 kg• Vibration Uncertainty (K Factor), Hammer Drilling Into Concrete: 1.5 m/s²• Vibration Uncertainty (K Factor), Chiselling: 1.5 m/s²• Battery Chemistry (Ni-Cd / Ni-MH / Li-ion): Li-ion• Electronic brake 

High Performance and efficiency brushless 5" angle grinder with variable speed for heavy-duty grinding applications Very compact cordless angle grinder with 18 V drive and a disc diameter of max. 125 mm for demanding, professional applications. Equipped with AFT and ADT. The speed is electronically adjustable. With restart protection. Features • Automatic torque Drive Technology (ADT) adjusts the torque and speed according to the load condition, enabling rapid movement between high speed and high torque applications• eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions• Active Feedback sensing Technology (AFT) automatically shuts down the tool if there is a sudden drop in rotation speed (e.g. kick-back)• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications• Anti-restart feature prevents accidental start up of tool during battery changing when switch is locked in the on position• Soft start feature gradually increases speed to eliminate start up shock• Variable speed dial enables operator to adjust wheel speed based on materials or application• Electronic current limiter protects motor from accidental overload• Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life, and overall battery life• Integrated dust screens act as additional protection against dust, dirt and debris• Ergonomic soft rubber grip design for vibration absorption and comfortable operation Technical specifications • Battery capacity 18 V • Battery system LXT • Battery type Li-ion • Brushless motor • Max. power output 660 W • No load speed: 3000 - 8500 min-¹ • Spindle thread M14 • Abore 22.23 mm • Max. disc Ø 125 mm • Restart protection • Vibration levels, surface grinding ≤ 2.5 m/s² • Vibration uncertainty factor (K value), surface grinding 1.5 m/s² • Vibration levels, surface grinding (roughing) 6.5 m/s² • Vibration uncertainty factor (K value), surface grinding (roughing) 1.5 m/s² • Product dimensions (L x W x H) 382 x 140 x 145 mm • Weight incl. battery 2.3 - 3.0 kg • Max. cutting depth 29 mm 

This professional tool is very popular to locksmiths, alarm system fitters and joiners. For anyone who regularly fits mortice locks it will prove invaluable - an accurate, speedy and professional tool that will save time and money. The tool allows the finishing of a mortice in a few minutes without removing the door.Offset doors: DBB Morticer can also be used on offset doors. The housing has slits allowing it to move the right and to the left, giving it the possibility to work on offset and double offset doors. It also cuts for hinges and striking plates on door frames of 95 mm thickness maximum.You may easily produce mortices for hinges and striking plates on door frames. (maximumof 95mm thickness).Carbide Tipped Mortice Cutters for wood: Compared to the previous design, these improved carbide-tipped mortice cutters increase the cutting speed by up to 50% and keep their sharpness longer. The simplified screw-on ‘anti-lock’ design enables the cutter to be released quickly using the spanner provided. All in all there are twelve cutters available.Aluminium doors: Separately we offer 4 different sizes of aluminium cutters, allowing work on aluminium doors without any problem.Always wear gloves and safety glasses when working on metal!Plunging Cutters: These new cutters are ideal for installers who need perfectly drilled true holes. Ideal for the quick installation of Tubular Latches, Deadbolts, Concealed Door Closers etc. The range of 4 sizes of ‘Plunging Cutters’ are designed for locks where perfect installation is an issue. Made from High Speed Steel, these very effective 3 point plunging drills are a real bonus for those wanting to solve installation problems.Small Bore Kit: This system has been developed especially for small mortices. The smaller cutters require a thinner shaft and a special housing kit.Long Drill System: The long Drill Kit has been specifically designed for the easy installation of electric lock cables through wooden doors - from lock to hinge.After cutting the mortice you convert the morticer into the long drill system. Special geometry helps to keep the cutter 'on line' with minimal effort. The Long Drill Kit is a leader in its field. It is quick, accurate and easy to use. Characteristics:Cuts mortice for lock and face plate.Fast and accurate on doors from 40 mm - 85 mm thick.Increased cutting speed of up to 50% thanks to carbide tipped cutters.Cuts mortices for hinges, some striking plates and electric releases.The ‘anti-lock’ design enables the cutter to be released quickly.Uses vertical guides, height and depth stops to ensure precise cutting.Wide range of accessories.Robust construction and precision manufacturing.  Advantages:The morticer can be operated by one person.Doors don’t have to be removed which saves time and money.Increases accuracy and speed of mortice cutting.Can be used on wooden and aluminium doors.Only requires a power drill to work.  Technical details:Max. working depth for mortices: 180 mmMax. working depth for long whole mortices: 1250 mmMax. working depth for small whole mortices: 100 mmMax. thickness of door: all  Requirements for drilling machine or electric screw driver:Chuck: 13 mmRpm: 2000-3000  

Features: • Spindle housing made of die-cast aluminium with 35 mm Ø collar • Euro collet 43 mm Ø • Particularly slim housing, easy to grip • Additional 3 mm and 8 mm collets available as accessories • Slide switch for convenient one-handed operation • Anti-restart feature with warning light prevents the machine from starting when the battery is inserted and switches on when the capacity is insufficient • Supplied in a cardboard boxTechnical Data: • Operating mode: Battery operated • Battery power: 18Volt • Collet chuck: 6 mm • No-load speed: 26,000 min-1 • Weight: 2.0 kg 

A powerful, brushless general-use drill for screwdriving and drilling A powerful brushless tool with two speeds for screwdriving and drilling for professional use. Max. torque of 50 / 25 Nm. A versatile tool for fitters, builders and maintenance staff. Integrated LED light. Features • eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions• Brushless DC motor with high power to weight and size ratio• Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications• Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life• 21 clutch settings deliver up to 440 in. lbs. of torque• All metal gears and gear housing for more efficient power transmission• Ultra-compact design (only 6-5/8" long)• Dual LED job lights with preglow and afterglow features• Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold Technical specifications • Nominal Battery Voltage: 18 V• Voltage: LXT• Brushless Motor• No load speed: 0 - 500 / 0 - 1900 min⁻¹• Max. fastening torque: Hard/Soft 50 / 27 Nm• Torque setting: 21• Max. Drilling Diameter in Wood: 38 mm• Max. Drilling Diameter in Steel: 13 mm• Driving Shank: 1/2"-20UNF "• Drill Chuck Capacity: 1,5 - 13 mm• Sound Pressure Level: (LpA) 74 dB(A)• Noise Uncertainty (K Factor): 3 dB(A)• Tool weight with battery: 1,4 - 1,7 kg• Product Dimensions: (L x W x H): 169 x 79 x 255 mm• Vibration Level, Drilling into metal: ≤ 2,5 m/s²• Vibration Uncertainty (K Factor), Drilling into metal: 1,5 m/s²• Drilling Capacity Wood (Auger Bit): 38 mm• Drilling Capacity Wood (Self-feed bit): 76 mm  

Technical data:Battery system: LXTModel: BL1850BBattery voltage: 18 VoltBattery capacity: 5 AhCapacity: 90 WhBattery type: Li-IonWeight: 0.60 kgDimensions (L x W x H): 113 x 75 x 62Specification:With battery charge level indicatorCertified German article