ARES Disc Detainer Opener Upgrade Kit – Dom Diamant

p>The “Short Thin Flat Flag” individual pick was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, flat flag profile with a deliberately shortened design. This makes the pick particularly well suited to smaller dimple locks.Its key feature is the compact working geometry: the flag is shorter than conventional Flat Flags, allowing it to be positioned much more effectively in smaller locking systems. With locks featuring a smaller profile, such as cam locks and similar cylinders, an overly long pick can quickly become an obstruction. You can get into the lock, but not necessarily where you actually need to work. This is where the Short Thin Flat Flag really comes into its own.With the flag aligned with the shaft, the profile remains slim and direct. The pick can be guided smoothly and positioned precisely on individual pins without unnecessarily extending deep into the lock. This makes it particularly useful for smaller dimple locks where available space is limited. Thanks to its reversible design, the pick can be used equally well by left- and right-handed users, reducing the need to switch between different picks.Specifications:Flag length: 2.0 mmFlag width: 1.5 mmFlag offset: 0.00 mmFlag orientation: left, rightPick shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130 mmWeight: 11 g 

The “Long Thin Flat Flag” individual pick was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, particularly slim Flat Flag profile and offers the full reach of the original Long Flat Flags, while providing a finer working surface for more precise positioning.Its key feature is the slim geometry: the flag is designed to be long while remaining deliberately thin. This allows the pick to be guided more precisely between closely spaced pins and positioned cleanly in locking systems where space is limited. This is particularly useful for dimple locks with closely spaced pins or opposing pin rows. In such situations, the pick needs to find its way through the lock without constantly catching on neighbouring pins.With the flag aligned with the shaft, the profile remains slim and direct. This provides good guidance in the keyway and clear feedback while working. The thinner design really comes into its own when the pick needs to be guided between opposing pin stacks.The Long Thin Flat Flag is particularly well suited to high-security dimple locks. When pins are positioned very close together or the lock geometry requires precise positioning between components, this profile provides greater control and reduces unnecessary contact inside the lock. Thanks to its reversible design, the pick can be used equally well by left- and right-handed users, reducing the need to switch between different picks.Specifications:Flag length: 3.0 mmFlag width: 1.5 mmFlag offset: 0.00 mmFlag orientation: left, rightPick shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130 mmWeight: 11 g 

The “Half Diamond Flat Flag” individual pick was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, flat flag profile with a finely tapered Half Diamond geometry, a shape that really comes into its own when pins need to be set precisely with minimal contact area.Its key feature is the combination of reach and precision: the flag has the same working length as the Long Flat Flags but tapers significantly towards the tip. This allows the pick to be guided precisely towards individual pins without creating unnecessary contact inside the lock. This is particularly advantageous for high-security dimple locks with tight tolerances, multiple pin rows, or very sensitive feedback.With the flag aligned with the shaft, the profile remains slim and direct. The pick can be guided smoothly, provides clear feedback, and helps you position individual pins precisely. Thanks to its reversible design, it can be used equally well by left- and right-handed users, reducing the need to switch between different picks.Its strengths lie in the fine Half Diamond tip, its long reach, and its precise handling when working with demanding locking systems.Specifications:Flag length: 3.0 mmFlag width: 2.0 mmFlag offset: 0.00 mmFlag orientation: left, rightPick shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130 mmWeight: 11 g 

The “Short Thin Flat Flag” individual pick was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, flat flag profile with a deliberately shortened design. This makes the pick particularly well suited to smaller dimple locks.Its key feature is the compact working geometry: the flag is shorter than conventional Flat Flags, allowing it to be positioned much more effectively in smaller locking systems. With locks featuring a smaller profile, such as cam locks and similar cylinders, an overly long pick can quickly become an obstruction. You can get into the lock, but not necessarily where you actually need to work. This is where the Short Thin Flat Flag really comes into its own.With the flag aligned with the shaft, the profile remains slim and direct. The pick can be guided smoothly and positioned precisely on individual pins without unnecessarily extending deep into the lock. This makes it particularly useful for smaller dimple locks where available space is limited. Thanks to its reversible design, the pick can be used equally well by left- and right-handed users, reducing the need to switch between different picks.Available here as a Community Edition with a larger, ergonomically shaped aluminium handle. This handle version was also developed in close collaboration with Lock Noob and is designed for users who prefer greater guidance and a larger grip. The larger diameter can be particularly comfortable for users with larger hands, as the pick sits more securely in the hand and allows fine movements to be controlled more precisely. The clearly marked zero position helps you keep track of the flag's orientation at all times.Specifications:Flag length: 2.0 mmFlag width: 1.5 mmFlag offset: 0.00 mmFlag orientation: left, rightPick shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130 mmWeight: 14 g 

The “Long Thin Flat Flag” individual pick was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, particularly slim Flat Flag profile and offers the full reach of the original Long Flat Flags, while providing a finer working surface for more precise positioning.Its key feature is the slim geometry: the flag is designed to be long while remaining deliberately thin. This allows the pick to be guided more precisely between closely spaced pins and positioned cleanly in locking systems where space is limited. This is particularly useful for dimple locks with closely spaced pins or opposing pin rows. In such situations, the pick needs to find its way through the lock without constantly catching on neighbouring pins.With the flag aligned with the shaft, the profile remains slim and direct. This provides good guidance in the keyway and clear feedback while working. The thinner design really comes into its own when the pick needs to be guided between opposing pin stacks.The Long Thin Flat Flag is particularly well suited to high-security dimple locks. When pins are positioned very close together or the lock geometry requires precise positioning between components, this profile provides greater control and reduces unnecessary contact inside the lock. Thanks to its reversible design, the pick can be used equally well by left- and right-handed users, reducing the need to switch between different picks.Available here as a Community Edition with a larger, ergonomically shaped aluminium handle. This handle version was also developed in close collaboration with Lock Noob and is designed for users who prefer greater guidance and a larger grip. The larger diameter can be particularly comfortable for users with larger hands, as the pick sits more securely in the hand and allows fine movements to be controlled more precisely. The clearly marked zero position helps you keep track of the flag's orientation at all times.Specifications:Flag length: 3.0 mmFlag width: 1.5 mmFlag offset: 0.00 mmFlag orientation: left, rightPick shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130 mmWeight: 14 g 

The “Half Diamond Flat Flag” individual pick was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, flat flag profile with a finely tapered Half Diamond geometry, a shape that really comes into its own when pins need to be set precisely with minimal contact area.Its key feature is the combination of reach and precision: the flag has the same working length as the Long Flat Flags but tapers significantly towards the tip. This allows the pick to be guided precisely towards individual pins without creating unnecessary contact inside the lock. This is particularly advantageous for high-security dimple locks with tight tolerances, multiple pin rows, or very sensitive feedback.With the flag aligned with the shaft, the profile remains slim and direct. The pick can be guided smoothly, provides clear feedback, and helps you position individual pins precisely. Thanks to its reversible design, it can be used equally well by left- and right-handed users, reducing the need to switch between different picks.Its strengths lie in the fine Half Diamond tip, its long reach, and its precise handling when working with demanding locking systems.Available here as a Community Edition with a larger, ergonomically shaped aluminium handle. This handle version was also developed in close collaboration with Lock Noob and is designed for users who prefer greater guidance and a larger grip. The larger diameter can be particularly comfortable for users with larger hands, as the pick sits more securely in the hand and allows fine movements to be controlled more precisely. The clearly marked zero position helps you keep track of the flag's orientation at all times.Specifications:Flag length: 3.0 mmFlag width: 2.0 mmFlag offset: 0.00 mmFlag orientation: left, rightPick shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130 mmWeight: 14 g