AUDI VW HU66 GEN.1 - ORIGINAL TURBO DECODER

HSS-G Spiral Drill Bit "Pittbull-Guider" High quality metal drill bit especially intended for use with 6mm pull screws. The hexagonal shaft enables it to be quickly inserted into any universal bit holder. For optimum results, use with a cordless drill, can also be used with conventional 3 jaw drill chuck.  Measurements:Diameter (Ø): 4.8 mmLength: 59 mmMax. drilling depth: 34 mmPoint angle: 135°Hexagonal shaft: ¼"  The listed prices refer to 1 piece, respectively.  

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money. The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly. Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products. In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.