Broken Key Extractor Set, 3 pcs.

ELITE Extractor-Set 4 pieces The 4-piece extractor kit contains the most modern tools to eliminate broken keys and other foreign bodies from locks and cylinders, even from very narrow keyways.Dimensions: 52 x 145 x 14 mm 

This practical tool enables you to remove pins, springs and fragment residues from the milling or drilling passage. 

The 4 extractors are stored in the hollow handle and can be place in the tension holder when needed. This saves place while at the same time allowing an optimal handling. These extractors vary greatly from the Extractor Set 2000. The spiral-shaped are turned into the keyway below the broken-off key and in most cases allow an easy extraction of key-parts. 

The Multipick ELITE Ultradecoder is designed to decipher the combination of multi wheeled locks. By placing the Ultradecoder on the axle that runs through the wheels inside the lock the operator can feel for changes in the features of the axle. Flat spots or grooves on the axle can be felt by the Ultradecoder as the operator spins the wheels. These flat spots or grooves will reveal the locks combination. By using the decoder on the axle beside each wheel the operator can line up all the flat spots or grooves to the same position. When this is done the combination will be set. The final step is to move combination into the correct position. Simply roll each wheel down one position and test the lock to open. Repeat this process until it does open.The Ultradecoder is made from thin high test steel with a solid steel handle.This decoder can also be used to depress the locking bar inside the Master 175 and other similar models quickly opening the lock. 

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors.