Bump Key Buffer-Kit - 11 pcs.

For standard cylinders of different producers with right (guided on the right) profiles and with distances of 4 mm between pins. For cylinders with 4-6 pins.Small Selection of the cylinder brands the Multiversal Set will work with:ASSACISACORBINFABFEBISEOK+K LEROY MERLINLIPSMELCHERTMETALRUKOTOKTRELOCKUNION VIROWALLYWELKAWERUWINKHAUSYALE … and many more!   

Many cylinders are much easier to open in one direction than the other or have been closed by various turns. Often, it is also impossible to pull the bump key out of the keyway once the cylinder has been unblocked. In these cases it is necessary to pass the locking position of the cylinder once or repeatedly without being able to use a plug spinner (because of the stuck bump key). We have, therefore, developed an adapter for plug spinners which allows using them in combination with bump keys. The adapter is mounted on the Plug Spinner or Flip-It and the key handle is placed in the cut of the adapter.(Does not work with article 3125 - Flip-It) The rotary force of the plug spinner is now transmitted on the rotor via the bump key.   

Most cylinder producers use a left (guided on the left) profile for their standard cylinders. As this usually is the only common characteristic, most traditional bump keys with this “universal“ profile can only be used with very limited success. Only our new Slider Percussion Keys allow changing and adapting the impact, depending largely on the cylinder. This allows overcoming differences in the cylinders of different producers, such as springs of different strengths, different shapes of pins, different distances from the front of the cylinder to the first pin and differences in depths, of course. We decided to produce our first Multiversal Set for cylinders with distances of 4 mm between pins, because this is the measure that is used by most producers in the production of their standard lines of cylinders. Small Selection of the cylinder brands the Multiversal Set will work with:ABUSAZBEBEFABIFFAR (old)BRICARDCABINETCASCESCISACLASSICCORONADOMDOCO EDIELZETTENFIELDERAFCVFLIETHERFTHGEBEGEGEGERDAHÄFELEISEOJOWILKFVK+KKRAFTLEGGELIPSLOGOMAUERMELCHERTMDNEMEFPOLENTROPERRUKOSATURNSECUR FASTSTEMSTERLINGSYSTECTIFONTOK / TRELOCKVERSCOVIROWALLYWINKHAUSWren BIRD BrandXICAYALE   

The handle of this bump hammer is less flexible. The hammer is for all those users who already master or want to master the advanced bumping technique of “cushioned bumps”. Here the bump key is held between thumb and index finger. When hitting the bump key the fingers act as a cushion against the cylinder, again allowing the key to “jump” back out. Weight : 74 g Length: 210 mm 

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness.