Bump Key CABINET

The Multipick ELITE SHANK quickly opens a large variety of everyday locks including most Filing Cabinets and Tool Chests! When used properly the SHANK will open the lock within seconds without any damage. Simply insert the SHANK through the key way and wiggle while turning the knife releasing the locking pawl and opening the lock.The Multipick ELITE Shank works on the following models and many more:File Cabinets & Tool ChestsHonWaterlooHudsonStanleyS&GYaleChicago6842CraftsmanEagleHuskyFraim PadlocksSlaymakerHerculesLudell,Master 77Sargent 752HS & 753HSTaylor 781 padlocks 

Bump Key BKS - Double sided key (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

The handle makes working much more comfortable and protects against injuries inside the hand by the edges of the opening cards.  Assembling is easy: with a simple paper punch the card can be punched and fitted like a sandwich between the two handle parts the two crosshead screws and their counter nuts. 

BLUE-TEC: The new generation of milling burrs especially for locksmiths better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs are also available with extrafine cross gearing HP-4 for harder kind of steel. Excellent control (also at difficult to reach positions):Smooth operationShort chipsGood surface finishMedium cutting action  For all kinds of steel:Up to extra hard steel ca. 70 HRCCast ironStainless steel (INOX)Heat-resistant substances, such as e.g. Nickel based + cobalt based alloys Conclusion: This fine gearing is the most suitable for extremely hard steel !! 

The door can be unlocked with the universal key after removing the cylinder. The calibration to determine the length of the cylinder is very practical. Version: metal. Art-No. 2030 Universal Key “long”Art-No. 2031 Universal Key “short” 

This tool was developed for opening and decoding vehicle locks in a one-step operation.Developed for vehicle locks mentioned below, this tool features a special profile that enables targeted picking of each individual disc of the cylinder. Once successfully opened, the code can be read from the scale on the tool and a key can be produced. One tool, three functions: Tensioning, picking and decoding.Suitable for:Ford Fiesta as of 2008, Focus as of 2004, C Max as of 2003, Galaxy as of 2006, Kuga as of 2008, Mondeo as of 2007, S Max as of 2006, Transit 2002 - 2007Landrover Discovery as of 2006, Range Rover as of 2005Volvo S40, V50Jaguar most models as of 2007 

THE NEW V-PRO SELF-TAPPING EXTRACTION-SCREWS Manufactured according to the latest state-of-the-art technical expertise Very powerful!High tensile strength and breaking load, combined with a high degree of torsion Our most economical customer uses our screws repeatedly up to 6 times - what should we do about this? No pre-drilling required! (self-tapping)It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coatingOptimized thread geometry and screw length!Maximum retention force in each cylinder profileOne-handed screw-in without a ScrewFix bit adapter!Whether by hand or cordless electric screwdriver, via its patented SIT® 20-bit drive (fully downward compatible with TORX20) A great advantage of the SIT 20 drive is that the screw can be driven in with one hand and without a screw adapter. Those who have ever had to thread in screws of other manufacturers will love this advantage! Having a high speed on the drill and applying pressure on the screw is advantageous for easy threading of the V-PRO extraction screw! DELTA SEAL® High-tech color anti-friction coating!The anti-friction coating supports easy screw-in actionAn individual colour scheme for each screw sizeCorrosion protection Important! Experience has shown that a lubricant is often used to assist in threading the screw. This is not necessary with V-PRO extraction screws and in fact is counterproductive.Our screw has an anti-friction coating that does not require a lubricant. If additional lubrication is used, it can lead to the shavings becoming clumped which can no longer be eliminated. V-PRO screws have an impression stamped into the screw-head! Latest technology — Made in Germany!We guarantee the highest qualityDepending on the ordered quantity, the screws will be sent either in boxes or sachets. In this packaging unit we include a SIT20 quality bit.