COBRA hook 1900 mm

The approx. 1.5 m long, flexible vehicle opening tool is designed in such a way that its hooked end mimics finger movements when pulling levers and flipping rockers. The other end of the tool is formed into a handle.The bright colored tips facilitate working inside dark interiors. The robust body makes this a very durable tool in comparison to many other similar car openers. 

Our car openers for opening via the inside, in connection with the Lever Suction Cup Set, allow the fast and non-destructive opening of almost every type of car. A newly developed pulling mechanism, mounted in the handle facilitates the exact positioning within the car and a secure pulling of handles, knobs, etc. If necessary the tools can be bent, thus allowing to reach even difficult or hidden locking mechanisms. Car Snare - long: The 4 mm strong pipe with its strong snare, which can be pulled using the mechanism in the handle, can be inserted through a gap between car door and frame. The snare then allows the catching, holding and pulling of objects inside the car. 1 pieceLength: 1500 mmDiameter: 4.0 mm  Controllable snare1500 mm lengthcollapsible using fine thread connection  

This double sided, 20cm long lever with differently shaped ends is an excellent tool for the careful opening of vehicle doors. After using this tool, an air wedge can then be easily inserted into the gap created. The hardened plastic material minimizes the risk of scratching paintwork, any chrome parts or damaging any rubber seals.   

The Multipick ELITE Ultradecoder is designed to decipher the combination of multi wheeled locks. By placing the Ultradecoder on the axle that runs through the wheels inside the lock the operator can feel for changes in the features of the axle. Flat spots or grooves on the axle can be felt by the Ultradecoder as the operator spins the wheels. These flat spots or grooves will reveal the locks combination. By using the decoder on the axle beside each wheel the operator can line up all the flat spots or grooves to the same position. When this is done the combination will be set. The final step is to move combination into the correct position. Simply roll each wheel down one position and test the lock to open. Repeat this process until it does open.The Ultradecoder is made from thin high test steel with a solid steel handle.This decoder can also be used to depress the locking bar inside the Master 175 and other similar models quickly opening the lock. 

These Auto wedges, made of plastic, are required for opening the car via the inside or via the lock rods. They widen and secure the created gap required for accessing the car. Additionally the groove within the wedge can be used to enter hooks, wires, the flex-a-light and other tools into the inside very easily.