Dyneema special cord for tilt window opener Kipp-Blitz

The (in our opinion) perfect Door Latch Slider The latch opening slider “TFG” completes our selection of tools for the opening of closed but unlocked doors . We are absolutely enthusiastic about the tool’s effectiveness and quality and use the "TFG" on an almost daily basis ourselves. The "TFG" comes in 5 different sizes: 15, 20, 25, 30 & 35 mm, each size optimized for the different types of offset door designs. Experience tells us that there is no better tool for the simple opening of closed but unlocked doors. Put this to the test yourself! The use is incredibly easy! Insert the "TFG" in the gap between door and frame, slide it down to the latch and the door opens.It is made out of highly flexible spring steel and is only as thick as 0.8 mm. The "TFG" can be used effectively almost everywhere. The "TFG" has no sharp edges, and does not cause scratches or other damages on the door or the frame. If the sliding of the "TFG" is made difficult by the sealing strip, lubrication of the "TFG" is very effective. 

THE NEW V-PRO SELF-TAPPING EXTRACTION-SCREWS Manufactured according to the latest state-of-the-art technical expertise Very powerful!High tensile strength and breaking load, combined with a high degree of torsion Our most economical customer uses our screws repeatedly up to 6 times - what should we do about this? No pre-drilling required! (self-tapping)It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coatingOptimized thread geometry and screw length!Maximum retention force in each cylinder profileOne-handed screw-in without a ScrewFix bit adapter!Whether by hand or cordless electric screwdriver, via its patented SIT® 20-bit drive (fully downward compatible with TORX20) A great advantage of the SIT 20 drive is that the screw can be driven in with one hand and without a screw adapter. Those who have ever had to thread in screws of other manufacturers will love this advantage! Having a high speed on the drill and applying pressure on the screw is advantageous for easy threading of the V-PRO extraction screw! DELTA SEAL® High-tech color anti-friction coating!The anti-friction coating supports easy screw-in actionAn individual colour scheme for each screw sizeCorrosion protection Important! Experience has shown that a lubricant is often used to assist in threading the screw. This is not necessary with V-PRO extraction screws and in fact is counterproductive.Our screw has an anti-friction coating that does not require a lubricant. If additional lubrication is used, it can lead to the shavings becoming clumped which can no longer be eliminated. V-PRO screws have an impression stamped into the screw-head! Latest technology — Made in Germany!We guarantee the highest qualityDepending on the ordered quantity, the screws will be sent either in boxes or sachets. In this packaging unit we include a SIT20 quality bit. 

THE NEW V-PRO SELF-TAPPING EXTRACTION-SCREWS Manufactured according to the latest state-of-the-art technical expertise Very powerful!High tensile strength and breaking load, combined with a high degree of torsion Our most economical customer uses our screws repeatedly up to 6 times - what should we do about this? No pre-drilling required! (self-tapping)It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coatingOptimized thread geometry and screw length!Maximum retention force in each cylinder profileOne-handed screw-in without a ScrewFix bit adapter!Whether by hand or cordless electric screwdriver, via its patented SIT® 20-bit drive (fully downward compatible with TORX20) A great advantage of the SIT 20 drive is that the screw can be driven in with one hand and without a screw adapter. Those who have ever had to thread in screws of other manufacturers will love this advantage! Having a high speed on the drill and applying pressure on the screw is advantageous for easy threading of the V-PRO extraction screw! DELTA SEAL® High-tech color anti-friction coating!The anti-friction coating supports easy screw-in actionAn individual colour scheme for each screw sizeCorrosion protection Important! Experience has shown that a lubricant is often used to assist in threading the screw. This is not necessary with V-PRO extraction screws and in fact is counterproductive.Our screw has an anti-friction coating that does not require a lubricant. If additional lubrication is used, it can lead to the shavings becoming clumped which can no longer be eliminated. V-PRO screws have an impression stamped into the screw-head! Latest technology — Made in Germany!We guarantee the highest qualityDepending on the ordered quantity, the screws will be sent either in boxes or sachets. In this packaging unit we include a SIT20 quality bit. 

This 9-piece set covers a wide range of typical door-opening requirements and provides practical, straightforward solutions for everyday locksmith use. The differently bent latch wires with a diameter of 1.6 mm meaningfully expand existing tool kits and complement standard equipment with versatile application options. The set includes wire needles for double-rebate doors, window rebate geometries, and standard doors, as well as dedicated versions for fire-rated doors, aluminum doors, uPVC doors, and combined uPVC/metal doors. The set is further complemented by a single-rebate wire needle for outward-opening panic doors and a spring wire suitable for working on cylinder clutches as well as for dismantling BKS round cylinders. The spring wire, designed for cylinder clutch work and the removal of BKS round cylinders, features a particularly slim diameter of just 1.4 mm, allowing precise operation even in very confined spaces.  

THE NEW V-PRO SELF-TAPPING EXTRACTION-SCREWS Manufactured according to the latest state-of-the-art technical expertise Very powerful!High tensile strength and breaking load, combined with a high degree of torsion Our most economical customer uses our screws repeatedly up to 6 times - what should we do about this? No pre-drilling required! (self-tapping)It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coatingOptimized thread geometry and screw length!Maximum retention force in each cylinder profileOne-handed screw-in without a ScrewFix bit adapter!Whether by hand or cordless electric screwdriver, via its patented SIT® 20-bit drive (fully downward compatible with TORX20) A great advantage of the SIT 20 drive is that the screw can be driven in with one hand and without a screw adapter. Those who have ever had to thread in screws of other manufacturers will love this advantage! Having a high speed on the drill and applying pressure on the screw is advantageous for easy threading of the V-PRO extraction screw! DELTA SEAL® High-tech color anti-friction coating!The anti-friction coating supports easy screw-in actionAn individual colour scheme for each screw sizeCorrosion protection Important! Experience has shown that a lubricant is often used to assist in threading the screw. This is not necessary with V-PRO extraction screws and in fact is counterproductive.Our screw has an anti-friction coating that does not require a lubricant. If additional lubrication is used, it can lead to the shavings becoming clumped which can no longer be eliminated. V-PRO screws have an impression stamped into the screw-head! Latest technology — Made in Germany!We guarantee the highest qualityDepending on the ordered quantity, the screws will be sent either in boxes or sachets. In this packaging unit we include a SIT20 quality bit.