ELITE G-Pro Community Dimple Pick-12 (L3)

The Multipick ELITE G-PRO Community Single Pick 04 L1 combines the proven finely polished L1 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The L1 pick is designed for:Left-oriented flag: the working surface of the tip is intended for situations where a left-sided approach inside the keyway is preferred or required.Flag width 1.60 mm: this slim contact surface is particularly useful in narrow or restrictive keyways, allowing clean access to the dimples without catching on surrounding contours.Flag length 2.00 mm: this slightly longer flag provides greater reach when dimples are positioned deeper or further back in the keyway, while maintaining stable tip control.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a neutral, direct approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 2.00 mmFlag width: 1.60 mmFlag offset: 0.00 mmFlag orientation: leftBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The Multipick ELITE G-PRO Community Single Pick 05 R1 combines the proven finely polished R1 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The R1 pick is designed for:Right-oriented flag: the working surface of the tip is intended for situations where a right-sided approach inside the keyway is preferred or required.Flag width 1.60 mm: this slim contact surface is particularly useful in narrow or restrictive keyways, allowing clean access to the dimples without catching on surrounding contours.Flag length 2.00 mm: this slightly longer flag provides greater reach when dimples are positioned deeper or further back in the keyway, while maintaining stable tip control.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a neutral, direct approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 2.00 mmFlag width: 1.60 mmFlag offset: 0.00 mmFlag orientation: rightBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The Multipick ELITE G-PRO Community Single Pick 10 R00 combines the proven finely polished R00 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The R00 pick is designed for:Right-oriented flag: the working surface of the tip is intended for situations where a right-sided approach inside the keyway is preferred or required.Flag width 1.30 mm: this very slim contact surface is especially useful in extremely narrow keyways where a tip is needed that can pass cleanly around contours without prematurely contacting or binding against surrounding surfaces.Flag length 1.50 mm: this short flag is helpful when space inside the keyway is limited and a highly controllable tip is desired that is less likely to unintentionally contact neighbouring pins or guide surfaces.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a direct, neutral approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 1.50 mmFlag width: 1.30 mmFlag offset: 0.00 mmFlag orientation: rightBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The Multipick ELITE G-PRO Community Single Pick 11 L00 combines the proven finely polished L00 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The L00 pick is designed for:Left-oriented flag: the working surface of the tip is intended for situations where a left-sided approach inside the keyway is preferred or required.Flag width 1.30 mm: this very slim contact surface is especially useful in extremely narrow keyways or profiles with pronounced contours, allowing the tip to pass through cleanly without prematurely contacting or binding against surrounding surfaces.Flag length 1.50 mm: this short flag remains highly controllable when space inside the keyway is limited and helps avoid unintentional contact with guide surfaces or neighbouring pins.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a direct, neutral approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 1.50 mmFlag width: 1.30 mmFlag offset: 0.00 mmFlag orientation: leftBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The Multipick ELITE G-PRO Community Single Pick 13 LR1 combines the proven finely polished LR1 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle and flag version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The LR1 pick is designed for:Flat flag geometry: the flag is aligned flush with the handle, creating an especially slim profile that is ideal for tight tolerances and complex keyways.Flag width 2.50 mm: this wide, flat contact surface is useful when a stable point of contact is desired for controlled pin guidance and clean pin placement.Flag length 2.00 mm: this length provides controlled reach without the tip becoming unstable inside the keyway, making it particularly suitable when precise positioning is required in confined spaces.Left and right orientation: the double-sided usability allows pins to be approached from both directions without constantly changing picks, which is especially practical for locks with multiple pin rows or varying picking angles.Specifications:Flag length: 2.00 mmFlag width: 2.50 mmFlag offset: 0.00 mmFlag orientation: left, rightBlade Ø: 1.15 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The Multipick ELITE G-PRO Community Single Pick 07 R3 combines the proven finely polished R3 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The R3 pick is designed for:Right-oriented flag: the working surface of the tip is intended for situations where a right-sided approach inside the keyway is preferred or required.Flag width 1.40 to 1.60 mm: this slim, slightly tapered contact surface is especially useful in narrow keyways where a tip is needed that can pass through cleanly without prematurely contacting surrounding contours, while the slightly wider section still provides sufficient contact area when more support is desired.Flag length 1.60 mm: this short flag is particularly useful when space inside the keyway is limited and a highly controllable tip is required that is less likely to unintentionally contact contours or neighbouring pins.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a direct, neutral approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 1.60 mmFlag width: 1.40 to 1.60 mmFlag offset: 0.00 mmFlag orientation: rightBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g