ELITE Locksport Community Pick Set

The special ELITE Top of the Keyway (TOK) Prybar Wrench Set 2 from Multipick is a combination of flat tension bars and heavy bars.All seven tensioners are made of high-quality steel and provide very good feedback when picking, due to their flexibility and hardness. The different shapes and lengths offer a wide range of opening options.The first three tools in the set are flat tension bars (SP11 to SP13, see pictures) offer a type of control that is often required, depending on the shape and condition of the lock. Some of them have teeth that are designed to increase the grip on the lock core.The four heavy bars (SP14 to SP17, see pictures) are designed for perfect tension control of the lock core. As with all types of tensioners that might be used for a specific lock, the following rule still applies: the closer the fit, the more control you will have over the lock core. Better control increases the frequency of feedback and facilitates minor adjustments.MP3SP11 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min 2.4 mm + max. 2.8 mmThickness: 0.6 mmTotal length: 76 mmWeight: 2 gMP3SP12 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 0.8 mmTotal length: 76 mmWeight: 2.5 gMP3SP13 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.0 mmTotal length: 76 mmWeight: 2.5 gMP3SP14 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.2 mmTotal length: 76 mmWeight: 3.5 gMP3SP15 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 3.9 mm + max. 4.2 mmThickness: 0.7 mmTotal length: 75.9 mmWeight: 2.0 gMP3SP16 Doublesided tension toolTechnical data:Side length: : 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 0.8 mmTotal length: 76.2 mmWeight: 2.5 gMP3SP17 Doublesided tension toolTechnical data:Side length: 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 1.2 mmTotal length: 76.2 mmWeight: 3.5 g Dimensions: 52 x 145 x 14 mmThis set is the perfect companion to our already "legendary" ELITE picks. 

The Multipick ELITE SHANK quickly opens a large variety of everyday locks including most Filing Cabinets and Tool Chests! When used properly the SHANK will open the lock within seconds without any damage. Simply insert the SHANK through the key way and wiggle while turning the knife releasing the locking pawl and opening the lock.The Multipick ELITE Shank works on the following models and many more:File Cabinets & Tool ChestsHonWaterlooHudsonStanleyS&GYaleChicago6842CraftsmanEagleHuskyFraim PadlocksSlaymakerHerculesLudell,Master 77Sargent 752HS & 753HSTaylor 781 padlocks 

The Multipick ELITE Ultradecoder is designed to decipher the combination of multi wheeled locks. By placing the Ultradecoder on the axle that runs through the wheels inside the lock the operator can feel for changes in the features of the axle. Flat spots or grooves on the axle can be felt by the Ultradecoder as the operator spins the wheels. These flat spots or grooves will reveal the locks combination. By using the decoder on the axle beside each wheel the operator can line up all the flat spots or grooves to the same position. When this is done the combination will be set. The final step is to move combination into the correct position. Simply roll each wheel down one position and test the lock to open. Repeat this process until it does open.The Ultradecoder is made from thin high test steel with a solid steel handle.This decoder can also be used to depress the locking bar inside the Master 175 and other similar models quickly opening the lock. 

Specially manufactured by ourselves to tackle the unusual properties of dimple pin tumbler locks. Also works with dimple pin cylinders made in the USA. Each individual dimple pin tensioner is made of high-quality spring steel and thus generates highly sensitive feedback.Specifications:1 x Tensioner with 1.2 mm thickness and 2.6 mm width 1 x Tensioner with 1.2 mm thickness and a conical width of 2.4 mm - 3.6 mm 1 x Tensioner with 1.5 mm thickness and 2.9 mm widthA Multipick product - Made in Germany 

A lockpick designed for lifting pins.This straight lock pick represents years of research and development. Based on various lock picks which are commercially available, and in combination with initial mathematical modelling and final analysis on several prototypes, we created these impeccably crafted picks.Welcome to the professional leagueThe ultimate lock-picks in worldwide unrivalled high-tech qualityFinest blades – high-quality spring steel - impeccable workmanshipFirst-class individual design - perfection in every detail100% Made in Germany –  from Multipick of courseWe invite you to test it and see for yourself!  Specifications:Pick type: StraightThickness: 0.6mmLength: 120mmWeight: 8gr.Blade material: High-quality spring steelHand grip material: High-quality stainless steel Our ELITE picks are rust-free thanks to a special hardening and tempering process.