Ford Tibbe Pick for locks with 6 discs

These 7-pins tubular picks are appropriated for 7-pins central tubular locks with smaller diameter. The slim and handy tool bodies are made of high quality stainless steel. Hardened spring steel feelers ensure regular, easy and sensible working.For easy distinction of the different diameters the picks are marked with coloured rings. Gold: Interior diameter: 7.0 mmExterior diameter: 8.9 mm Purple: Interior diameter: 7.5 mmExterior diameter: 9.5 mm Blue: Interior diameter: 7.8 mmExterior diameter: 9.6 mm Tubular picks are delivered in a plastic box with foam inlets. 

With the aid of this special tensioner, which was designed by Lock Noob especially for Multipick, a wide range of tubular locks can be opened successfully. In addition, this tensioner also supports the ball bearing drill protection found in some locks. This tubular tensioner is made from Multipick's well-known high quality spring steel  which ensures a sensitive feedback. A product of Multipick "Made in Germany - Made in Bonn". 

6-sided Cutter for drilling out tubular (radial pin tumbler) locks.  

The perfect extension for electric picks, manual pick guns and all different standard pick blades supports. Often requirements to a tool are very special. These 18 different pick tips may help you to increase considerably the chances of success when picking a cylinder lock.The German heavy-duty steel which we use is a highly hardened and tempered metal alloy, unique on the world market. To our knowledge there is no other producer - a part of Multipick -, who uses such a high quality material for pick manufacturing. We are not going to divulge any details, but we are sure that you won’t find the same elsewhere. By precise production in our manufactory changing the blades is “a piece of cake“.The single blade modules made from German high-end steel can be integrated into your Jackknife pick set in a breath. Simply loosen the Allen screw and change the respective blade module. Thus you are optimally prepared for all picking mission, howsoever tricky. Multipick is essentially committed to production of German high-end tools. We disapprove of cheap tools with minor to bad quality, partially produced in low wage countries under inhumane conditions. Multipick clearly speaks up for German high-class workmanship. Therefor our products are elaborately manufactured according to German quality standards. We only guarantee for extraordinarily high material and manufacturing quality on Multipick labelled products! High-end material with perfectly functioning even after many missions - We do not sell steel scrap squeezed into shape, since we develop for the future. Made in Germany - Made in Bonn   

The Multipick ELITE Ultradecoder is designed to decipher the combination of multi wheeled locks. By placing the Ultradecoder on the axle that runs through the wheels inside the lock the operator can feel for changes in the features of the axle. Flat spots or grooves on the axle can be felt by the Ultradecoder as the operator spins the wheels. These flat spots or grooves will reveal the locks combination. By using the decoder on the axle beside each wheel the operator can line up all the flat spots or grooves to the same position. When this is done the combination will be set. The final step is to move combination into the correct position. Simply roll each wheel down one position and test the lock to open. Repeat this process until it does open.The Ultradecoder is made from thin high test steel with a solid steel handle.This decoder can also be used to depress the locking bar inside the Master 175 and other similar models quickly opening the lock.