Makita DGD800Z Die Grinder 18Volt LXT w/o battery

The pulling device QA Pro 2 allows complete door opening in less than 20 seconds! This makes it the perfect pulling tool for authorities and rescue forces worldwide, since it guarantees a safe, fault-tolerant and simple handling.Functioning:QA Pro 2 is hooked on the special pull screw which is screwed in the cylinder. Just a slight lever movement is necessary to break the cylinder. The QA Pro 2 protection jaws avoid scratches on the door surface or on the fitting.All sizes of our special pull (extraction) screws can be used with the QA Pro 2. The QA Pro 2 is a quality tool from Germany, which has been constructed for a lifetime application in the professional environment. Since the tool works almost maintenance and wear-free, it is predestined for applications with authorities and rescue forces. Dimensions:Length (maxi. stretched): 455 mmLength (max. bent): 385 mmTube height: 30 mmTube width: 20 mmClamping height: 40 mmClamping width: 20 mmWeight: approx. 2.2 kg 

The (in our opinion) perfect Door Latch Slider The latch opening slider “TFG” completes our selection of tools for the opening of closed but unlocked doors . We are absolutely enthusiastic about the tool’s effectiveness and quality and use the "TFG" on an almost daily basis ourselves. The "TFG" comes in 5 different sizes: 15, 20, 25, 30 & 35 mm, each size optimized for the different types of offset door designs. Experience tells us that there is no better tool for the simple opening of closed but unlocked doors. Put this to the test yourself! The use is incredibly easy! Insert the "TFG" in the gap between door and frame, slide it down to the latch and the door opens.It is made out of highly flexible spring steel and is only as thick as 0.8 mm. The "TFG" can be used effectively almost everywhere. The "TFG" has no sharp edges, and does not cause scratches or other damages on the door or the frame. If the sliding of the "TFG" is made difficult by the sealing strip, lubrication of the "TFG" is very effective.The door latch slider “TFG” is highly flexible but still strong and almost indestructible. Only 0.8 mm thick! Without sharp edges. 

Opening set for single and double rebated doors  Every locksmith is familiar with the problem of a double rebated door that has fallen shut. These spiral openers made of high-quality spring steel can be used in many cases to open double rebate doors without causing damage. The usage is very simple: The tool is screwed in through the narrow gap between door and frame until it hits the latch. Then the lock latch is pushed back by turning it further. Apart from a punctured rubber seal, there is usually no damage to the door and frame. The set consists of 2 tools with different material thicknesses (1.5 and 1.7 mm) and spiral leads for different door frames. Of course, the tools are also perfectly suitable for opening single rebated doors! 

The Plain Burr 50 mm from Soubertools is a milling burr specially designed for opening locks made of brass, steel and aluminium. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

Makita 3 mm collet with union nut