Makita quick charger - LXT - 14.4V/18V

Dual-component Impressioning Material for the key copying system QUICK-KEY-EASY PRO.  

Special Metal Casting Alloy for the key copying system QUICK-KEY EASY PRO. (approx. 6 to 8 tablets) 

Handle levers are important tools in cases of mechanical defects of the lock. Unfortunately this type of problem is very common and presents a great challenge to locksmiths. With the help of the door handle lever the latch can be activated by pushing down the handle on the other side of the door, thus opening the door. This unique tool, therefore, is a very simple solution to a difficult problem. 

The 3.5 mm Door Handle Lasso Tool is a classic opening tool designed for non-destructive entry through slammed doors. Thanks to its slim diameter, it can be guided through the gap beneath the door to reach the interior door handle, which is then operated via the pull cord to depress the handle from the outside. This allows access without damaging the lock or the door. The tool works particularly well on doors with sufficient clearance at the bottom edge (approx. 4 mm or more), or in combination with methods used to create or widen the gap. In many cases, this simple technique provides the quickest solution for opening a door that has merely been slammed shut. Further developed in collaboration with locksmiths and authorities, this tool remains a proven and practical standard solution for professional users who regularly deal with slammed doors. Dimensions: Pull cord length: 156 cm Handle section length: 25 cm Cord attachment section length: 11.5 cm Lever section length: 113 cm  

With the aid of this special tensioner, which was designed by Lock Noob especially for Multipick, a wide range of tubular locks can be opened successfully. In addition, this tensioner also supports the ball bearing drill protection found in some locks. This tubular tensioner is made from Multipick's well-known high quality spring steel  which ensures a sensitive feedback. A product of Multipick "Made in Germany - Made in Bonn". 

The Multipick ELITE Ultradecoder is designed to decipher the combination of multi wheeled locks. By placing the Ultradecoder on the axle that runs through the wheels inside the lock the operator can feel for changes in the features of the axle. Flat spots or grooves on the axle can be felt by the Ultradecoder as the operator spins the wheels. These flat spots or grooves will reveal the locks combination. By using the decoder on the axle beside each wheel the operator can line up all the flat spots or grooves to the same position. When this is done the combination will be set. The final step is to move combination into the correct position. Simply roll each wheel down one position and test the lock to open. Repeat this process until it does open.The Ultradecoder is made from thin high test steel with a solid steel handle.This decoder can also be used to depress the locking bar inside the Master 175 and other similar models quickly opening the lock.