Panic door opener Set, 2 pieces

Opening-Set for single- and double-offset doorsEvery locksmith knows the problem of closed double-offset doors. The new ACE spiral needles, made of high quality spring steel, allow the non-destructive opening of double-offset doors in most cases. The use is very simple: The tool is inserted in the narrow gap between door and frame by turning until it makes contact with the latch. Continued turning pushes back the latch. Usually this process does not cause any damages except a pierced sealing strip. The set consists of four (4) different tools for doors with the lock mounted either on the right or on the left and 2 different material strengths (1.5 and 1.7 mm) for the different types of offset door designs. Of course, the ACE-tools are very well suited for opening simple offset doors as well!For very tightly engaging (closing) double and simple offset doors the ACE-Mini-Set (2 pieces) of only 1.25 mm needle-strength is especially suited. 

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors. 

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

Door Latch Spatula 20 mm The ideal tool for closed but unlocked offset doors with difficult latch. Its polished edges and optimally calculated shape guarantee high success rates.  Door Latch Spatula 35 mm For metal and plastic doors with latches situated far back.  Door Latch Spatula 45 mm For plastic doors with 60 mm and 70 mm frame profiles. 

A single set for many door-opening possibilities. This 9-piece set offers you the answer to the most common door-opening issues. Due to the varied bendings of the 1.7 mm wires, there will certainly be a suitable wire for your task. A set that should be part of every locksmith's tool kit.Scope of Delivery:• 1x Standard double rebate wire needle• 1x Double rebate wire needle for rebate windows• 1x Standard single rebate wire needle• 1x Single rebate wire needle for fire resistant doors• 1x Single rebate wire needle for aluminium doors• 1x Single rebate wire needle for uPVC doors• 1x Single rebate wire needle for uPVC/metal doors• 1x Single rebate wire needle for panic doors (outward opening)• 1x Spring wire for cylinder clutch and for dismantling BKS round cylinders